skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Reassessment of PWR pressure-vessel integrity during overcooling accidents

Abstract

A continuing analysis of the PTS problem associated with PWR postuated OCA's indicates that the previously accepted degree of conservatism in the fracture-mechanics model needs to be more closely evaluated, and if excessive, reducted. One feature that was believed to be conservative was the use of two-dimensional as opposed to finite-length (three-dimensional) flaws. A flaw of particular interest is one that is located in an axial weld of a plate-type vessel. For those vessels that suffer relatively high radiation damage in the welds, the length of the flaw will be no greater than the length of the weld, and recent calculations indicate that a deep flaw of that length (approx. 2 m) is not effectively infinitely long, contrary to previous thinking. The benefit to be derived from consideration of the 2-m flaw and also a semielliptical flaw with a length-to-depth ratio of 6/1 was investigated by analyzing several postulated transients. In doing so the sensitivity of the benefit to a specified maximum crack arrest toughness and to the duration of the transient was investigated. Results of the analysis indicate that for some conditions the benefit in using the 2-m flaw is substantial, but it decreases with increasing pressure, and abovemore » a certain pressure there may be no benefit, depending on the duration of the transient and the limit on crack arrest toughness.« less

Authors:
;
Publication Date:
Research Org.:
Oak Ridge National Lab., TN (USA)
OSTI Identifier:
5492562
Report Number(s):
CONF-830607-26; CONF-830868-1
ON: DE83017204
DOE Contract Number:  
W-7405-ENG-26
Resource Type:
Conference
Resource Relation:
Conference: American Society of Mechanical Engineers pressure vessel and piping conference, Portland, OR, USA, 19 Jun 1983
Country of Publication:
United States
Language:
English
Subject:
22 GENERAL STUDIES OF NUCLEAR REACTORS; 21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS; PRESSURE VESSELS; FRACTURE MECHANICS; THERMAL SHOCK; PWR TYPE REACTORS; REACTOR ACCIDENTS; TEMPERATURE GRADIENTS; DEFECTS; FRACTURE PROPERTIES; REACTOR SAFETY; THERMAL STRESSES; ACCIDENTS; CONTAINERS; MECHANICAL PROPERTIES; MECHANICS; REACTORS; SAFETY; STRESSES; WATER COOLED REACTORS; WATER MODERATED REACTORS; 220900* - Nuclear Reactor Technology- Reactor Safety; 210200 - Power Reactors, Nonbreeding, Light-Water Moderated, Nonboiling Water Cooled

Citation Formats

Cheverton, R D, and Ball, D G. Reassessment of PWR pressure-vessel integrity during overcooling accidents. United States: N. p., 1983. Web.
Cheverton, R D, & Ball, D G. Reassessment of PWR pressure-vessel integrity during overcooling accidents. United States.
Cheverton, R D, and Ball, D G. 1983. "Reassessment of PWR pressure-vessel integrity during overcooling accidents". United States. https://www.osti.gov/servlets/purl/5492562.
@article{osti_5492562,
title = {Reassessment of PWR pressure-vessel integrity during overcooling accidents},
author = {Cheverton, R D and Ball, D G},
abstractNote = {A continuing analysis of the PTS problem associated with PWR postuated OCA's indicates that the previously accepted degree of conservatism in the fracture-mechanics model needs to be more closely evaluated, and if excessive, reducted. One feature that was believed to be conservative was the use of two-dimensional as opposed to finite-length (three-dimensional) flaws. A flaw of particular interest is one that is located in an axial weld of a plate-type vessel. For those vessels that suffer relatively high radiation damage in the welds, the length of the flaw will be no greater than the length of the weld, and recent calculations indicate that a deep flaw of that length (approx. 2 m) is not effectively infinitely long, contrary to previous thinking. The benefit to be derived from consideration of the 2-m flaw and also a semielliptical flaw with a length-to-depth ratio of 6/1 was investigated by analyzing several postulated transients. In doing so the sensitivity of the benefit to a specified maximum crack arrest toughness and to the duration of the transient was investigated. Results of the analysis indicate that for some conditions the benefit in using the 2-m flaw is substantial, but it decreases with increasing pressure, and above a certain pressure there may be no benefit, depending on the duration of the transient and the limit on crack arrest toughness.},
doi = {},
url = {https://www.osti.gov/biblio/5492562}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Sat Jan 01 00:00:00 EST 1983},
month = {Sat Jan 01 00:00:00 EST 1983}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: