Operation of the repeating pneumatic injector on TFTR and design of an 8-shot deuterium pellet injector
The repeating pneumatic hydrogen pellet injector, which was developed at the Oak Ridge National Laboratory (ORNL), has been installed and operated on the Tokamak Fusion Test Reactor (TFTR). The injector combines high-speed extruder and pneumatic acceleration technologies to propel frozen hydrogen isotope pellets repetitively at high speeds. The pellets are transported to the plasma in an injection line that also serves to minimize the gas loading on the torus; the injection line incorporates a fast shutter valve and two stages of guide tubes with intermediate vacuum pumping stations. A remote, stand-alone control and data acquisition system is used for injector and vacuum system operation. In early pellet fueling experiments on TFTR, the injector has been used to deliver deuterium pellets at speeds ranging from 1.0 to 1.5 km/s into plasma discharges. First, single large (nominal 4-mm-dia) pellets provided high densities in TFTR (1.8 x 10/sup 14/ cm/sup -3/ on axis); after conversion to smaller (nominal 2.7-mm-dia) pellets, up to five pellets were injected at 0.25-s intervals into a plasma discharge, giving a line-averaged density of 1 x 10/sup 14/ cm/sup -3/. Operating characteristics and performance of the injector in initial tests on TFTR are presented.
- Research Organization:
- Oak Ridge National Lab., TN (USA). Fusion Energy Div.; Princeton Univ., NJ (USA). Plasma Physics Lab.
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 5424923
- Report Number(s):
- CONF-8510266-3; ON: DE86014222
- Resource Relation:
- Conference: International pellet fueling workshop, La Jolla, CA, USA, 30 Oct 1985; Other Information: Portions of this document are illegible in microfiche products
- Country of Publication:
- United States
- Language:
- English
Similar Records
A three-barrel repeating pneumatic pellet injector for plasma fueling of the Joint European Torus
Small-bore (1. 8-mm), high-firing-rate (10-Hz) version of a repeating pneumatic hydrogen pellet injector
Related Subjects
PELLET INJECTION
TFTR TOKAMAK
DEUTERIUM
HYDROGEN
OPERATION
PLASMA DENSITY
PNEUMATICS
ELEMENTS
FLUID MECHANICS
HYDROGEN ISOTOPES
ISOTOPES
LIGHT NUCLEI
MECHANICS
NONMETALS
NUCLEI
ODD-ODD NUCLEI
STABLE ISOTOPES
THERMONUCLEAR REACTORS
TOKAMAK TYPE REACTORS
700205* - Fusion Power Plant Technology- Fuel
Heating
& Injection Systems