skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Isolated data acquisition system for high voltage applications

Conference ·
OSTI ID:5291472

This report describes the design and operation of a microcomputer controlled system for acquisition of both analog and binary data within the high voltage stages of a linac modulator. The system is comprised of a microprocessor Controller which communicates with the remote data Acquisition circuits via an optical bus. The bus, which uses a 1 MHz Manchester II format, is configured as a loop, starting at the Controller, daisy-chaining the remote cards and terminating back at the Controller. Upon receiving a linac timing pulse, the Controller sends addressed commands to the individual remote cards and receives data back. It then passes this data to the linac control system through a Multibus connection. Each remote circuit can return 16 binary sense and 7 (12 bit) analog parameters within 270 us. This speed is possible because of a pipelined design where one word is transmitted while another is being converted. A data conversion cycle is initiated when a remote data acquisition card receives the proper command and address from the controller.

Research Organization:
Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); SLAC National Accelerator Lab., Menlo Park, CA (United States)
DOE Contract Number:
AC02-76CH03000
OSTI ID:
5291472
Report Number(s):
FNAL-TM-1323; CONF-850504-247; ON: DE85016984
Resource Relation:
Conference: Particle accelerator conference, Vancouver, Canada, 13 May 1985; Other Information: Portions of this document are illegible in microfiche products. Original copy available until stock is exhausted
Country of Publication:
United States
Language:
English