W-1 SLSF post-test data analysis. Part 1. Thermal hydraulic analysis. [LMFBR]
Four types of tests were performed: (1) a decay heat transient test, (2) Loss-of-Piping-Integrity (LOPI) tests, (3) Boiling Window Tests (BWT), and (4) a fuel pin dryout and failure test. In addition, preliminary tests were run to check systems performance, instrumentation performance and test section heat balance. The objective of the decay heat test was to determine the decay heat transfer characteristics of fresh fuel pins with subcooled sodium. The objective of the LOPI experiments was to test the thermal behavior of fuel pins with four different fuel conditions subjected to the same transient. The transient was designed to simulate a rapid flow decrease as a result of pipe rupture followed by a reactor scram. The objective of the Boiling Window Tests was to study boiling initiation and progression of boiling within the fuel pin bundle.
- Research Organization:
- General Electric Co., Sunnyvale, CA (USA). Advanced Reactor Systems Dept.
- DOE Contract Number:
- AT03-76SF71032
- OSTI ID:
- 5236034
- Report Number(s):
- DOE/SF/71032-T48; ON: DE82008043; TRN: 82-015973
- Country of Publication:
- United States
- Language:
- English
Similar Records
HEDL W-1 SLSF experiment LOPI transient and boiling test results. [LMFBR]
W-1 SLSF experiment. [LMFBR]
Related Subjects
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS
FUEL PINS
THERMAL STRESSES
LMFBR TYPE REACTORS
LOSS OF COOLANT
HEAT TRANSFER
HYDRAULICS
TEST FACILITIES
AFTER-HEAT
FUEL ASSEMBLIES
REACTOR SAFETY
ACCIDENTS
BREEDER REACTORS
ENERGY TRANSFER
EPITHERMAL REACTORS
FAST REACTORS
FBR TYPE REACTORS
FLUID MECHANICS
FUEL ELEMENTS
LIQUID METAL COOLED REACTORS
MECHANICS
REACTOR ACCIDENTS
REACTOR COMPONENTS
REACTORS
SAFETY
STRESSES
220900* - Nuclear Reactor Technology- Reactor Safety
210500 - Power Reactors
Breeding