Laboratory procedures used in the hot corrosion project
The objective of the Hot Corrosion Project in the LLNL Metals and Ceramics Division is to study the physical and chemical mechanisms of corrosion of nickel, iron, and some of their alloys when these metals are subjected to oxidizing or sulfidizing environments at temperatures between 850 and 950/sup 0/C. To obtain meaningful data in this study, we must rigidly control many parameters. Parameters are discussed and the methods chosen to control them in this laboratory. Some of the mechanics and manipulative procedures that are specifically related to data access and repeatability are covered. The method of recording and processing the data from each experiment using an LS-11 minicomputer are described. The analytical procedures used to evaluate the specimens after the corrosion tests are enumerated and discussed.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 5105409
- Report Number(s):
- UCID-18593; TRN: 80-016068
- Country of Publication:
- United States
- Language:
- English
Similar Records
Preparation and Testing of Corrosion-and Spallation-Resistant Coatings
Significance of Experimental Procedures on the Hot Corrosion Behavior of Nickel-Base Alloys Under Cyclic Conditions
Related Subjects
ALUMINIUM ALLOYS
CORROSION
ELECTRIC FURNACES
OPERATION
IRON
IRON ALLOYS
NICKEL
NICKEL ALLOYS
DATA ACQUISITION
LABORATORY EQUIPMENT
MICROPROCESSORS
TESTING
ALLOYS
CHEMICAL REACTIONS
ELEMENTS
FURNACES
METALS
TRANSITION ELEMENTS
360105* - Metals & Alloys- Corrosion & Erosion