Durability of double-shell tank waste grouts
This report summarizes results of studies conducted in FY89 to assess the durability of grouted DST waste. This is in support of WHC`s grout disposal program to determine the physical/chemical properties of simulated DST grouts cured for extended time periods at elevated temperatures. This report presents results of tests on simulated DST grout samples cured up to 6 months at 75 to 95 C. All the testing and characterization were done on a single formulation of DS slurry feed grout. The simulated waste was the same as in the Nov. 1988 pilot- scale test of grout processing. The dry blend (47 wt% slag, 47 wt% class F fly ash, 6 wt% type I/II portland cement) was mixed with the simulated waste at a mix ratio of 9 lb/gal. Resultant grout slurry was cast into molds and cured at 100% RH at 75, 85, and 95 C. Leach resistance and compressive strength decreased with curing times and temperatures. The samples absorbed water during curing (up to 9 wt%) as a result of osmotic pressures caused by the high salt content within the grout, and this may have caused microcracking and reduced strength. Cracking due to increased internal pressures from salt crystallization also may have occurred as the samples cooled from curing.
- Research Organization:
- Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
- Sponsoring Organization:
- USDOE Assistant Secretary for Nuclear Energy, Washington, DC (United States)
- DOE Contract Number:
- AC06-76RL01830
- OSTI ID:
- 479174
- Report Number(s):
- PNL-7835; ON: DE97003997; TRN: 97:010887
- Resource Relation:
- Other Information: PBD: Dec 1992
- Country of Publication:
- United States
- Language:
- English
Similar Records
Characterization of double-shell slurry feed grout produced in a pilot-scale test
Pilot-scale verification test for Hanford grout