Simple structures test for elastic-plastic strain acceptance criterion validation
- Electric Boat Corp., Groton, CT (United States)
- Wyle Labs., Inc., Huntsville, AL (United States)
A Simple Structures Test Program was performed where several cantilevered beam and fixed-end beam test specimens (fabricated from HY-80 steel) were subjected to a series of analytically predetermined rapidly applied transient dynamic input loads. The primary objective of the test program was to obtain dynamic nonlinear response for simple structures subjected to these load inputs. Data derived from these tests was subsequently used to correlate to analysis predictions to assess the capability to analytically predict elastic-plastic nonlinear material behavior in structures using typical time-dependent (transient) design methods and the ABAQUS finite element analysis code. The installation of a significant amount of instrumentation on these specimens and post-test measurements enabled the monitoring and recording of strain levels, displacements, accelerations, and permanent set. An assessment of modeling parameters such as the element type and mesh refinement was made using these test results. In addition, currently available material models and the incremental time step procedure used in the transient analyses were evaluated. Comparison of test data to analysis results shows that displacements, accelerations, and peak strain can be predicted with a reasonable level of accuracy using detailed solid models of the tested specimens. Permanent set is overpredicted by a factor of approximately two. However, the accuracy of the prediction of permanent set is being enhanced by updating material modeling in the ABAQUS code to account for effects of strain reversal in oscillatory behavior of dynamically loaded specimens.
- Research Organization:
- Knolls Atomic Power Lab. (KAPL), Niskayuna, NY (United States)
- Sponsoring Organization:
- USDOE Assistant Secretary for Nuclear Energy, Washington, DC (United States)
- DOE Contract Number:
- AC12-76SN00052
- OSTI ID:
- 319661
- Report Number(s):
- KAPL-P-000206; K-97124; CONF-971164-; ON: DE99001964; TRN: AHC29909%%42
- Resource Relation:
- Conference: 68. shock and vibration symposium, Baltimore, MD (United States), 3 Nov 1997; Other Information: PBD: Nov 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Elastic-plastic finite element analysis-to-test correlation for structures subjected to dynamic loading
Elastic-plastic finite element analysis-to-test correlation for structures subjected to dynamic loading