Structure-Processing-Property Relationships at the Fiber-Matrix Interface in Electron-Beam Cured Composite Materials
The objective of this project was to characterize the properties of the resin and the fiber- resin interface in electron beam cured materials by evaluating several structural and processing parameters. The Oak Ridge National Laboratory (ORNL) has recently determined that the interlaminar shear strength properties of electron beam cured composites were 19-28% lower than for autoclave cured composites. Low interlaminar shear strength is widely acknowledged as the key barrier to the successfid acceptance and implementation of electron beam cured composites in industry. In this project we found that simple resin modification and process improvements are unlikely to substantially improve the interlaminar shear strength properties of electron beam cured composites. However, sizings and coatings were shown to improve these properties and there appears to be significant potential for further improvement. In this work we determined that the application of epoxy-based, electron beam compatible sizings or coatings onto surface- treated, unsized carbon fibers improved the composite interlaminar shear strength by as much as 55% compared to composites fabricated from surface-treated, unsized carbon fibers and 11 YO compared to composites made from surface-treated, GP sized carbon fibers. This work has identified many promising pathways for increasing the interlaminar shear strength of electron beam cured composites. As a result of these promising developments we have recently submitted a U.S. Department of Energy-Energy Research (DOE-ER) sponsored Laboratory Technical Research-Cooperative Research and Development Agreement (LTR- CRADA) proposal entitled, "Interracial Properties of Electron Beam Cured Composites", to continue this work. If funded, ORNL will lead a 3-year, $2.6 million effort involving eight industrial partners, NASA-Langley, and the U.S. Air Force. The principal objective of this CRADA is to significantly improve the interracial properties of carbon-fiber-reinforced composites beyond the current state-of-the art electron beam cured composites for use in several DOE, DoD, and industrial applications. In addition, several papers from this Laboratory Director's Research and Development (LDRD) project will be submitted to the Society for the Advancement of Materials and Process Engineering for oral presentations and publications.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Oak Ridge, TN
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- AC05-96OR22464
- OSTI ID:
- 2732
- Report Number(s):
- ORNL-6947; ON: DE00002732
- Country of Publication:
- United States
- Language:
- English
Similar Records
CRADA Final Report for CRADA No. ORNL99-0544, Interfacial Properties of Electron Beam Cured Composites
IACMI Project 4.2: Thermoplastic Composite Development for Wind Turbine Blades