skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Engineering development of advanced coal-fired low-emission boiler systems. Technical progress report number 14, January--March, 1996

Technical Report ·
DOI:https://doi.org/10.2172/257402· OSTI ID:257402

The Project is under budget and generally on schedule. The current status is shown in the Milestone Schedule Status Report included as Appendix A. Task 7--Component Development and Optimization and Task 11--Subsystem Test Operation and evaluation are shown to be slightly behind schedule. Also, addition of Kalina technology may delay completion of Task 8. However, Phase 2 will be completed on schedule. The Project and plans for the POCTF were presented to the Richmond Power and Light Board of Directors. Technology transfer activities included delivering papers at two conferences, submitting paper abstracts for two other conferences and organizing a Technical Session for a conference. Under Task 7 the 200 acfm CeraMem filter test rig was installed at Richmond Power and Light and testing commenced. Low-NO{sub x} firing system work was essentially completed. In Task 8 integrating and optimizing the performance and design of the boiler, turbine/generator and heat exchangers of the Kalina cycle is proceeding but it has required much more time than anticipated. Preliminary designs of this equipment are nearly complete. Plant design and licensing activities will restart in April. The test designs and plan created in Task 9 were previously submitted and approved, although the plan for the 5,000 acfm CeraMem filter test will be updated following completion of the 200 acfm test. Task 10 work is nearly complete. The test rig for the 5,000 acfm CeraMem test has been shipped to the fabricator`s shop, inspected, cleaned and is being modified based on input from the 200 acfm testing. Task 11 work on the CeraMem filter was delayed and is expected to be started during the next reporting period. The second series of combustion testing of the low-NO{sub x} firing system was completed and the data is being analyzed. Early review indicates that 0.1 lb of NO{sub x}/million Btu may be achievable with reasonable stoichiometry and carbon loss.

Research Organization:
ABB Combustion Engineering, Inc., Windsor, CT (United States). ABB Power Plant Labs.
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
AC22-92PC92159
OSTI ID:
257402
Report Number(s):
DOE/PC/92159-T16; ON: DE96012287; TRN: AHC29615%%99
Resource Relation:
Other Information: PBD: 28 May 1996
Country of Publication:
United States
Language:
English