Quantitative prediction of stresses during thermoset cure
Conference
·
OSTI ID:253366
Two thin-walled Al tubes were filled with epoxy which were cured isothermally; one tube was instrumented with strain gauges, and the other with thermocouples. Finite element codes were used. Predicted and measured centerline hoop strains are shown; predictions and measurements agree. This is being applied to encapsulated components.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 253366
- Report Number(s):
- SAND-96-1589C; CONF-960786-4; ON: DE96011718
- Resource Relation:
- Conference: 3. international conference on composites engineering, New Orleans, LA (United States), 21-26 Jul 1996; Other Information: PBD: [1996]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Residual Stress Developed During the Cure of Thermosetting Polymers: Optimizing Cure Schedule to Minimize Stress
Stress build-up during the reaction of thermoset films cured above the ultimate T{sub g}
Mechanical modeling of stress generation during cure of encapsulating resins
Technical Report
·
Wed Jun 01 00:00:00 EDT 2016
·
OSTI ID:253366
Stress build-up during the reaction of thermoset films cured above the ultimate T{sub g}
Conference
·
Fri Dec 31 00:00:00 EST 1993
·
OSTI ID:253366
Mechanical modeling of stress generation during cure of encapsulating resins
Conference
·
Tue Jan 01 00:00:00 EST 1991
·
OSTI ID:253366
+2 more