skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Kinetics of Mn-based sorbents for hot coal gas desulfurization. Quarterly progress report, July 15, 1995--September 15, 1995

Technical Report ·
DOI:https://doi.org/10.2172/181492· OSTI ID:181492

The Morgantown Energy Technology Center (METC) of the U.S. Department of Energy (DOE) is actively pursuing the development of reliable and cost-effective processes to clean coal gasifier gases for application to integrated gasification combined cycle (IGCC) and molten carbonate fuel cell (MCFC) power plants. A large portion of gas cleanup research has been directed towards hot gas desulfurization using Zn-based sorbents. However, zinc titinate sorbents undergo reduction to the metal at temperatures approaching 700{degrees}C. In addition, sulfate formation during regeneration leads to spalling of reactive 293 surfaces. Due to zinc-based sorbent performance, METC has shown interest in formulating and testing manganese-based sorbents. Westmoreland and Harrison evaluated numerous candidate sulfur sorbents and identified Mn as a good candidate. Later, Turkdogan and Olsson tested manganese-based sorbents which demonstrated superior desulfurization capacity under high temperatures, and reducing conditions. Recently, Ben-Slimane and Hepworth conducted several studies on formulating Mn-sorbents and desulfurizing a simulated fuel gas. Although thermodynamics predicts higher over-pressures with Mn verses Zn, under certain operating conditions Mn-based sorbents may obtain < 20 ppmv. In addition, the manganese-sulfur-oxygen (Mn-S-O) system does not reduce to the metal under even highly reducing gases at high temperatures (550-900{degrees}C). Currently, many proposed IGCC processes include a water quench prior to desulfurization. This is for two reasons; limitations in the process hardware (1000{degrees}C), and excessive Zn-based sorbent loss (about 700{degrees}C). With manganese the water quench is obviated due to sorbent loss, as Mn-based sorbents have been shown to retain reactivity under cycling testing at 900{degrees}C. This reduces system hardware, and increases thermal efficiency while decreasing the equilibrium H{sub 2}S over-pressure obtainable with a manganese sorbent.

Research Organization:
Minnesota Univ., Minneapolis, MN (United States). Dept. of Civil and Mineral Engineering
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
FG22-94PC94212
OSTI ID:
181492
Report Number(s):
DOE/PC/94212-T4; ON: DE96005024; TRN: 96:001226
Resource Relation:
Other Information: PBD: 15 Sep 1995
Country of Publication:
United States
Language:
English