Preliminary studies on the impact of smoke on digital equipment
- Sandia National Labs., Albuquerque, NM (United States)
- Oak Ridge National Lab., TN (United States)
- USNRC Office of Research, Washington, DC (United States)
Last year the USNRC initiated a program at Sandia National Laboratories to determine the potential impact of smoke on advanced safety-related digitial instrumentation. In recognition of the fact that the reliability of safety-related equipment during or shortly after a fire in a nuclear power plant is more risk significant than long-term effects, we are concentrating on short-term failures. We exposed a multiplexer module board to three different types of smoke to determine whether the smoke would affect its operation. The operation of the multiplexer board was halted by one out of the three smoke exposures. In coordination with Oak Ridge National Laboratory, an experimental digital safety system was also smoke tested. The series of tests showed that smoke can cause potentially serious failures of a safety system. Most of these failures were intermittent and showed that smoke can temporarily interrupt communication between digital systems.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- Nuclear Regulatory Commission, Washington, DC (United States)
- OSTI ID:
- 158484
- Report Number(s):
- SAND-95-2698C; CONF-9510156-3; ON: TI96003096
- Resource Relation:
- Conference: 23. water reactor safety information meeting, Bethesda, MD (United States), 23-25 Oct 1995; Other Information: PBD: [1995]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effects of smoke on functional circuits
Circuit bridging of digital equipment caused by smoke from a cable fire