Fuel dispersal modeling for aircraft-runway impact scenarios
A fuel dispersal model for C-141 transport accidents was developed for the Defense Nuclear Agency`s Fuel Fire Technology Base Program to support Weapon System Safety Assessments. The spectrum of accidents resulting from aircraft impact on a runway was divided into three fuel dispersal regimes: low, intermediate, and high-velocity impact. Sufficient data existed in the accident, crash test, and fuel-filled bomb literature to support development of a qualitative framework for dispersal models, but not quantitative models for all regimes. Therefore, a test series at intermediate scale was conducted to generate data on which to base the model for the high-velocity regime. Tests were conducted over an impact velocity range from 12 m/s to 91 m/s and angles of impact from 22.5{degrees} to 67.5{degrees}. Dependent variables were area covered by dispersed fuel, amount of mass in that area, and location of the area relative to the impact line. Test results showed that no liquid pooling occurred for impact velocities greater than 61 m/s, independent of the angle of impact. Some pooling did occur at lower velocities, but in no test was the liquid-layer thickness greater than 5.25 mm.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- Defense Nuclear Agency, Washington, DC (United States)
- OSTI ID:
- 155780
- Report Number(s):
- SAND-95-2529; ON: DE96003136
- Resource Relation:
- Other Information: PBD: Nov 1995
- Country of Publication:
- United States
- Language:
- English
Similar Records
Impact Analyses and Tests of Metal Cask Considering Aircraft Engine Crash - 12308
Fuel dispersal in high-speed aircraft/soil impact scenarios