B1 magnet harmonics

Technical Report · Tue May 30 00:00:00 EDT 2000

DOI:https://doi.org/10.2172/15005727· OSTI ID:15005727

Barnes, P D

During the B0 Overpass construction for the CDF detector at Fermilab, 33 B1 magnets were measured using a bucked tangential coil. Measurements were made on the midplane, at the centerline and at {+-} 1 inch horizontal displacement. Since the coil was only 62 inches long, measurements were made at four longitudinal positions. Because of the design of the Main Ring, it was sufficient to combine data from all positions and report the harmonic spectrum for the magnet as a whole. For modeling the Scrounge-atron, it is more useful to treat each measurement position separately. The author reports here an analysis of the harmonic spectra at each probe position, based on the original data.

• Research Organization: Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
• Sponsoring Organization: US Department of Energy (US)
• DOE Contract Number: W-7405-ENG-48
• OSTI ID: 15005727
• Report Number(s): UCRL-ID-139414; TRN: US0305612
• Resource Relation: Other Information: PBD: 30 May 2000
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
CONSTRUCTION
DESIGN
FERMILAB
FERMILAB COLLIDER DETECTOR
HARMONICS
MAGNETS
PROBES
SIMULATION
SPECTRA