Solvent Hold Tank Sample Results for MCU-15-556-557-558. March 2015 Monthly Sample

Technical Report · Mon May 04 00:00:00 EDT 2015

DOI:https://doi.org/10.2172/1179685· OSTI ID:1179685

Fondeur, F. ^[1]; Taylor-Pashow, K. ^[1]

---

1. Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

Savannah River National Laboratory (SRNL) received one set of Solvent Hold Tank (SHT) samples (MCU-15-556, MCU-15-557, and MCU-15-558), pulled on 03/16/2015 for analysis. The samples were combined and analyzed for composition. Analysis of the composite sample MCU-15-556-557-558 indicated a low concentration (~ 78 % of nominal) of the suppressor (TiDG) and concentrations of the extractant (MaxCalix), and of the modifier (CS-7SB) in the solvent that were slightly lower than nominal. This analysis confirms the addition of TiDG, MaxCalix, and modifier to the solvent in February 2015. Based on the current monthly sample, the levels of TiDG, MaxCalix, and modifier are sufficient for continuing operation without adding a trim at this time. No impurities above the 1000 ppm level were found in this solvent by the Semi-Volatile Organic Analysis (SVOA). However, the p-nut vials that delivered the samples contained small (1 mm) droplets of oxidized modifier and amides (as detected by the FTIR analysis). In addition, up to 21 microgram of mercury per gram of solvent (or 17.4 µg/mL) was detected in this sample. The laboratory will continue to monitor the quality of the solvent in particular for any new impurities or degradation of the solvent components.

• Research Organization: Savannah River Site (SRS), Aiken, SC (United States)
• Sponsoring Organization: USDOE
• DOE Contract Number: AC09-08SR22470
• OSTI ID: 1179685
• Report Number(s): SRNL-STI-2015-00206
• Country of Publication: United States
• Language: English