U.S. Department of Energy Reference Model Program RM2: Experimental Results
- Univ. of Minnesota, Minneapolis, MN (United States). St. Anthony Falls Laboratory (UMN-SAFL)
- Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)
The Reference Model Project (RMP), sponsored by the U.S. Department of Energy’s (DOE) Wind and Water Power Technologies Program within the Office of Energy Efficiency & Renewable Energy (EERE), aims at expediting industry growth and efficiency by providing non-proprietary Reference Models (RM) of MHK technology designs as study objects for open-source research and development (Neary et al. 2014a,b). As part of this program, MHK turbine models were tested in a large open channel facility at the University of Minnesota’s St. Anthony Falls Laboratory (UMN - SAFL) . Reference Model 2 (RM2) is a 1:15 geometric scale dual - rotor cross flow vertical axis device with counter - rotating rotors, each with a rotor diameter dT = 0.43m and rotor height, hT = 0.323 m. RM2 is a river turbine designed for a site modeled after a reach in the lower Mississippi River near Baton Rouge, Louisiana (Barone et al. 2014) . Precise blade angular position and torque measurements were synchronized with three acoustic Doppler velocimeters (ADV) aligned with each rotor and the midpoint for RM2 . Flow conditions for each case were controlled such that depth, h = 1m, and volumetric flow rate, Qw = 2. 35m3s-1 , resulting in a hub height velocity of approximately Uhub = 1. 2 ms-1 and blade chord length Reynolds numbers of Rec = 6 .1x104. Vertical velocity profiles collected in the wake of each device from 1 to 10 rotor diameters are used to estimate the velocity recovery and turbulent characteristics in the wake, as well as the interaction of the counter-rotating rotor wakes. The development of this high resolution laboratory investigation provides a robust dataset that enables assessing computational fluid dynamics (CFD) models and their ability to accurately simulate turbulent inflow environments, device performance metrics, and to reproduce wake velocity deficit, recovery and higher order turbulent statistics.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Univ. of Minnesota, Minneapolis, MN (United States). St. Anthony Falls Laboratory (UMN-SAFL)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1171458
- Report Number(s):
- SAND2014-16561R; 534480
- Country of Publication:
- United States
- Language:
- English
Similar Records
U.S. Department of Energy Reference Model Program RM1: Experimental Results.
Reference Model 2 Scaled Geometry (RM2: River Current Turbine)