Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II

Bane, K.; Stupakov, G.

doi:10.2172/1131463

Title: Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II

Full Record
Other Related Research

Authors:: Bane, K.; Stupakov, G.

Publication Date:: Thu May 08 00:00:00 EDT 2014

Research Org.:: SLAC National Accelerator Lab., Menlo Park, CA (United States)

Sponsoring Org.:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI Identifier:: 1131463

Report Number(s):: SLAC-PUB-15951
arXiv:1405.0330

DOE Contract Number:: AC02-76SF00515

Resource Type:: Technical Report

Country of Publication:: United States

Language:: English

Subject:: General Physics,ACCPHY

Citation Formats


                    Bane, K., Stupakov, G., and /SLAC. Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II.  United States: N. p., 2014. 
        Web.  doi:10.2172/1131463.

Copy to clipboard


                    Bane, K., Stupakov, G., & /SLAC. Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II.  United States.  https://doi.org/10.2172/1131463

Copy to clipboard


                    Bane, K., Stupakov, G., and /SLAC. 2014.  
        "Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II".  United States.  https://doi.org/10.2172/1131463.  https://www.osti.gov/servlets/purl/1131463.

Copy to clipboard


                    
@article{osti_1131463,

  title        = {Roughness Tolerance Studies for the Undulator Beam Pipe Chamber of LCLS-II},

  author       = {Bane, K. and Stupakov, G. and /SLAC},

  abstractNote = {},

  doi          = {10.2172/1131463},

  url          = {https://www.osti.gov/biblio/1131463},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Thu May 08 00:00:00 EDT 2014},

  month        = {Thu May 08 00:00:00 EDT 2014}

}

Copy to clipboard

Technical Report:

View Technical Report

https://doi.org/10.2172/1131463

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

LCLS Spontaneous Radiation with Reflection along the Beam Line in the Undulator Pipes

Technical Report

Monte Carlo simulations of the spontaneous radiation at low and high energies up to the Near Experimental Hall entrance yield beam widths for use in the design of transport and diagnostic instruments in the Front End Enclosure.
https://doi.org/10.2172/1000325

Full Text Available
Resistive wall wakefield in the LCLS undulator beam pipe

Technical Report Bane, Karl; Stupakov, Gennady

We have shown that, due to the ac resistive wall wakefield, the present LCLS undulator design, with its round copper beam pipe, will result in an unacceptably large energy variation induced within the bunch over the length of the undulator (0.6%). If, instead, we use a flat, aluminum chamber, the energy variation can be reduced to within acceptable limits (less-than-or-similar-to 0.2%). Finally we have shown that the effect of the anomalous skin effect in the beam pipe wall is small, and can be ignored.
https://doi.org/10.2172/833045

Full Text Available
LCLS Spontaneous Radiation with Reflection along the Beam Line in the Undulator Pipes

Technical Report Fong, K

Some commissioning and alignment procedures for XTOD may rely on the use of the spontaneous radiation. Therefore we have modeled the spontaneous radiation between the Undulator and the Near Experimental Hall to derive numerical values of the expected beam width and of the energy deposition. The values are then used to determine aperture sizes and detector sensitivities. We performed the calculations in three stages. The first was to generate an appropriate distribution of photons within the Undulator. The second was to simulate the emergence of the photons from the Undulator. The third was to propagate the photons (without any obstructingmore »« less
https://doi.org/10.2172/883598

Full Text Available
LCLS-II Undulator Tolerance Analysis

Conference Nuhn, H; Marks, S; Wu, J

The SLAC National Accelerator Laboratory is building a new FEL user facility, LCLS-II, as a major upgrade to the Linear Coherent Light Source (LCLS). The upgrade will include two new Free Electron Lasers (FELs), to generate soft (SXR) and hard x-ray (HXR) SASE FEL radiation, based on planar, variable gap hybrid undulators with two different undulator periods (SXU: 55 mm, HXU: 32 mm). An algebraic FEL tolerance analysis for the undulator lines, including tuning, alignment, and phase correction tolerances has been performed. The methods and results are presented in this paper.
Full Text Available
Performance of the SLAC-PAL-Vitzrotech X-band Cavity BPMs in the LCLS-II Undulator Beam Lines

Conference Nantista, C.; Hoobler, S.; Kim, C.; ...
Full Text Available

Similar Records