skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Measure Guideline: Condensing Boilers - Optimizing Efficiency and Response Time During Setback Operation

Abstract

Conventional wisdom surrounding space heating has told us a couple of things consistently for several years now: size the mechanical systems to the heating loads and setting the thermostat back at night will result in energy savings. The problem is these two recommendations oppose each other. A system that is properly sized to the heating load will not have the extra capacity necessary to recover from a thermostat setback, especially at design conditions. The implication of this is that, for setback to be successfully implemented, the heating system must be oversized. This issue is exacerbated further when an outdoor reset control is used with a condensing boiler, because not only is the system matched to the load at design, the outdoor reset control matches the output to the load under varying outdoor temperatures. Under these circumstances, the home may never recover from setback. Special controls to bypass the outdoor reset sensor are then needed. Properly designing a hydronic system for setback operation can be accomplished but depends on several factors. Determining the appropriateness of setback for a particular project is the first step. This is followed by proper sizing of the boiler and baseboard to ensure the needed capacity canmore » be met. Finally, control settings must be chosen that result in the most efficient and responsive performance. This guide provides step by step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.« less

Authors:
 [1]
  1. National Renewable Energy Lab. (NREL), Golden, CO (United States)
Publication Date:
Research Org.:
National Renewable Energy Lab. (NREL), Golden, CO (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Building Technologies Office
OSTI Identifier:
1126299
Report Number(s):
DOE/GO-102014-4369
KNDJ-0-40342-03
DOE Contract Number:  
AC36-08GO28308
Resource Type:
Technical Report
Resource Relation:
Related Information: Work performed by Consortium for Advanced Residential Buildings (CARB), Norwalk, Connecticut
Country of Publication:
United States
Language:
English
Subject:
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION; RESIDENTIAL; RESIDENTIAL BUILDINGS; CARB II; BUILDING AMERICA; GAS-FIRED; MODULATING CONDENSING BOILERS; OUTDOOR RESET CONTROL; NIGHT SETBACK; AFUE; RIGHT-SIZING; HYDRONIC SYSTEMS; MASS STORAGE; ACCA MANUAL J; BOOST CONTROL; BASEBOARD CONVECTORS; INDIRECT DHW SYSTEM; COMBUSTION EFFICIENCY; RECOVERY PERIOD; Buildings

Citation Formats

Arena, L. Measure Guideline: Condensing Boilers - Optimizing Efficiency and Response Time During Setback Operation. United States: N. p., 2014. Web. doi:10.2172/1126299.
Arena, L. Measure Guideline: Condensing Boilers - Optimizing Efficiency and Response Time During Setback Operation. United States. https://doi.org/10.2172/1126299
Arena, L. 2014. "Measure Guideline: Condensing Boilers - Optimizing Efficiency and Response Time During Setback Operation". United States. https://doi.org/10.2172/1126299. https://www.osti.gov/servlets/purl/1126299.
@article{osti_1126299,
title = {Measure Guideline: Condensing Boilers - Optimizing Efficiency and Response Time During Setback Operation},
author = {Arena, L.},
abstractNote = {Conventional wisdom surrounding space heating has told us a couple of things consistently for several years now: size the mechanical systems to the heating loads and setting the thermostat back at night will result in energy savings. The problem is these two recommendations oppose each other. A system that is properly sized to the heating load will not have the extra capacity necessary to recover from a thermostat setback, especially at design conditions. The implication of this is that, for setback to be successfully implemented, the heating system must be oversized. This issue is exacerbated further when an outdoor reset control is used with a condensing boiler, because not only is the system matched to the load at design, the outdoor reset control matches the output to the load under varying outdoor temperatures. Under these circumstances, the home may never recover from setback. Special controls to bypass the outdoor reset sensor are then needed. Properly designing a hydronic system for setback operation can be accomplished but depends on several factors. Determining the appropriateness of setback for a particular project is the first step. This is followed by proper sizing of the boiler and baseboard to ensure the needed capacity can be met. Finally, control settings must be chosen that result in the most efficient and responsive performance. This guide provides step by step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.},
doi = {10.2172/1126299},
url = {https://www.osti.gov/biblio/1126299}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Sat Feb 01 00:00:00 EST 2014},
month = {Sat Feb 01 00:00:00 EST 2014}
}