Large-Grain Superconducting Gun Cavity Testing Program Phase One Closing Report

Technical Report · Thu Oct 31 00:00:00 EDT 2013

DOI:https://doi.org/10.2172/1116506· OSTI ID:1116506

Hammons, L. ^[1]; Bellavia, S. ^[1]; Belomestnykh, S. ^[1]; Ben-Zvi, I. ^[1]; Cullen, C. ^[1]; Dai, J. ^[1]; Degen, C. ^[1]; Hahn, H. ^[1]; Masi, L. ^[1]; McIntyre, G. ^[1]; Schultheiss, C. ^[1]; Seda, T. ^[1]; Kellerman, R. ^[1]; Tallerico, T. ^[1]; Todd, R. ^[1]; Tuozzolo, S. ^[1]; Xu, W. ^[1]; Than, Y. ^[1]

---

1. Brookhaven National Lab. (BNL), Upton, NY (United States)

This report details the experimental configuration and RF testing results for the first phase of a large-grained niobium electron gun cavity testing program being conducted in the Small Vertical Testing Facility in the Collider-Accelerator Department. This testing is meant to explore multi-pacting in the cavity and shed light on the behavior of a counterpart cavity of identical geometry installed in the Energy Recovery LINAC being constructed in the Collider-Accelerator Department at Brookhaven National Laboratory. This test found that the Q of the large-grained cavity at 4 K reached ~6.5 × 10⁸ and at 2 K reached a value of ~6 × 10⁹. Both of these values are about a factor of 10 lower than would be expected for this type of cavity given the calculated surface resistance and the estimated geometry factor for this half-cell cavity. In addition, the cavity reached a peak voltage of 0.6 MV before there was sig-nificant decline in the Q value and a substantial increase in field emission. This relatively low volt-age, coupled with the low Q and considerable field emission suggest contamination of the cavity interior, possibly during experimental assembly. The results may also suggest that additional chemical etching of the interior surface of the cavity may be beneficial. Throughout the course of testing, various challenges arose including slow helium transfer to the cryostat and cable difficulties. These difficulties and others were eventually resolved, and the re-port discusses the operating experience of the experiment thus far and the plans for future work aimed at exploring the nature of multipacting with a copper cathode inserted into the cavity.

• Research Organization: Brookhaven National Lab. (BNL), Upton, NY (United States)
• Sponsoring Organization: USDOE Office of Science (SC)
• DOE Contract Number: AC02-98CH10886
• OSTI ID: 1116506
• Report Number(s): BNL-102610-2013-IR; R&D Project: KBCH139; KB0202011
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
75 CONDENSED MATTER PHYSICS
SUPERCONDUCTIVITY AND SUPERFLUIDITY