GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108

Holcomb, G R; Tylczak, J; Meier, G H; Lutz, B; Jung, K; Mu, N; Yanar, N M; Pettit, F S; Zhu, J; Wise, A; Laughlin, D; Sridhar, S

Title: GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108

Full Record
Other Related Research

Abstract

The goals are to: (1) Achieve 90% CO{sub 2} capture at no more than a 35% increase in levelized cost of electricity of post-combustion capture for new and existing conventional coal-fired power plants; (2) Provide high-temperature corrosion information to aid in materials development and selection for oxy-fuel combustion; and (3) Identify corrosion mechanism and behavior differences between air- and oxy-firing.

Authors:: Holcomb, G R; Tylczak, J; Meier, G H; Lutz, B; Jung, K; Mu, N; Yanar, N M; Pettit, F S; Zhu, J; Wise, A; Laughlin, D; Sridhar, S

Publication Date:: Sun May 20 00:00:00 EDT 2012

Research Org.:: National Energy Technology Lab. (NETL), Pittsburgh, PA, and Morgantown, WV (United States). In-house Research

Sponsoring Org.:: USDOE Office of Fossil Energy (FE)

OSTI Identifier:: 1043284

Report Number(s):: NETL-PUB-208
TRN: US201213%%174

Resource Type:: Conference

Resource Relation:: Conference: 8th International Symposium on High-Temperature Corrosion and Protection of Materials, Les Embiez, France, May 20-25, 2012.

Country of Publication:: United States

Language:: English

Subject:: 54 ENVIRONMENTAL SCIENCES; AIR; CARBON DIOXIDE; CAPTURE; COMBUSTION; COST; CORROSION; ELECTRICITY; POWER PLANTS; MATERIALS

Citation Formats


                    Holcomb, G R, Tylczak, J, Meier, G H, Lutz, B, Jung, K, Mu, N, Yanar, N M, Pettit, F S, Zhu, J, Wise, A, Laughlin, D, and Sridhar, S. GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108.  United States: N. p., 2012. 
        Web.

Copy to clipboard


                    Holcomb, G R, Tylczak, J, Meier, G H, Lutz, B, Jung, K, Mu, N, Yanar, N M, Pettit, F S, Zhu, J, Wise, A, Laughlin, D, & Sridhar, S. GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108.  United States.

Copy to clipboard


                    Holcomb, G R, Tylczak, J, Meier, G H, Lutz, B, Jung, K, Mu, N, Yanar, N M, Pettit, F S, Zhu, J, Wise, A, Laughlin, D, and Sridhar, S. 2012.  
        "GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108".  United States.  https://www.osti.gov/servlets/purl/1043284.

Copy to clipboard


                    
@article{osti_1043284,

  title        = {GRH 12-01 Fireside Corrosion in Oxy-fuel Combustion Poster 0108},

  author       = {Holcomb, G R and Tylczak, J and Meier, G H and Lutz, B and Jung, K and Mu, N and Yanar, N M and Pettit, F S and Zhu, J and Wise, A and Laughlin, D and Sridhar, S},

  abstractNote = {The goals are to: (1) Achieve 90% CO{sub 2} capture at no more than a 35% increase in levelized cost of electricity of post-combustion capture for new and existing conventional coal-fired power plants; (2) Provide high-temperature corrosion information to aid in materials development and selection for oxy-fuel combustion; and (3) Identify corrosion mechanism and behavior differences between air- and oxy-firing.},

  doi          = {},

  url          = {https://www.osti.gov/biblio/1043284},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Sun May 20 00:00:00 EDT 2012},

  month        = {Sun May 20 00:00:00 EDT 2012}

}

Copy to clipboard

Conference:

View Conference (1.52 MB)

Other availability

Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Fireside Corrosion in Oxy-Fuel Combustion of Coal

Conference Holcomb, G; Tylczak, J; Meier, G; ...

The goal is to develop technologies for pulverized coal boilers with >90% CO{sub 2} capture and sequestration and <35% increase in the cost of electricity. Air-fired power plant experience shows a corrosion loss max at 680-700 C. Low melting point alkali metal trisulfates, such as (K,Na){sub 3}Fe(SO{sub 4}){sub 3}, become thermally unstable above this temperature range. Some overall conclusions are: (1) CO{sub 2} + 30% H{sub 2}O more corrosive than Ar + 30% H{sub 2}O; (2) Excess O{sub 2} in H{sub 2}O can, in some cases, greatly increase oxidation; (3) Coal ash is generally innocuous without SO{sub 3}3 in gasmore »« less
Full Text Available
Enabling Staged Pressurized Oxy-Combustion: Improving Flexibility and Performance at Reduced Cost

Technical Report Hume, Scott

Introduction: The staged pressurized oxy-combustion (SPOC) process, developed by Washington University in St. Louis (WUSTL), is an oxy-combustion carbon capture technology that employs a steam power cycle to generate electricity. As with atmospheric-pressure oxy-combustion processes, carbon dioxide (CO₂) capture rates of 90% or higher can be achieved. The staged-combustion approach of the SPOC process, when operated at elevated gas pressure, allows for near elimination of flue gas recycle (FGR) and leads to significant improvements in efficiency and reduced costs. The primary goal of this project was to investigate the potential for SPOC for flexible operation beyond the capabilities of conventionalmore »« less
https://doi.org/10.2172/1545657

Full Text Available
Simulated fireside corrosion of T91 in oxy-combustion systems with an emphasis on coal/biomass environments

Journal Article Holcomb, Gordon; Carney, Casey; Tylczak, Joseph; ... - Materials at High Temperatures

Oxy-combustion is the burning of a fuel in oxygen rather than air for the ease of capture of CO2 for reuse or sequestration. Corrosion issues associated with the change in heat exchanger tube operating environment (replacement of most of the N₂ with CO₂ and potentially higher SO_x levels) from air- to oxy-combustion were examined. The ferritic-martensitic alloy T91 was used in accelerated fireside corrosion tests using several different gas compositions and ash deposit overcoats to simulate air-fired, oxy-fired coal, and oxy-fired co-fired coal/biomass conditions. Initial corrosion was observed after 240 h of exposure by examining cross-sections with retained ash. Metalmore »« less
https://doi.org/10.1080/09603409.2019.1626612

Full Text Available
Performance and flexibility improvements of Staged Pressurized Oxy-Combustion

Conference Hume, Scott; Yang, Zhiwei; Kumfer, Benjamin; ...

Staged Pressurized Oxy-Combustion (SPOC) is a low-carbon coal combustion power technology being developed by Washington University in St. Louis (WUSTL). Oxy-combustion plants enable straightforward capture of carbon dioxide (CO₂) by removing most of the nitrogen in the combustion air prior to use, thereby burning fuel in near-pure oxygen instead of air, producing a flue gas containing primarily CO₂ and water. CO₂ capture at amounts > 90% is possible, often using cryogenic air separation. Oxy-combustion typically relies on flue gas recycle (FGR) to reduce the peak temperature and radiation that would otherwise occur in a fuel/oxygen only flame. SPOC reduces themore »« less
https://doi.org/10.2139/ssrn.3817794

Full Text Available
Fireside Corrosion in Oxy-fuel Combustion of Coal

Journal Article Holcomb, Gordon; Tylczak, Joseph; Meier, Gerald; ... - Oxidation of Metals

Oxy-fuel combustion is burning a fuel in oxygen rather than air for ease of capture of CO₂ from for reuse or sequestration. Corrosion issues associated with the environment change (replacement of much of the N₂ with CO₂ and higher sulfur levels) from air- to oxy-firing were examined. Alloys studied included model Fe–Cr alloys and commercial ferritic steels, austenitic steels, and nickel base superalloys. The corrosion behavior is described in terms of corrosion rates, scale morphologies, and scale/ash interactions for the different environmental conditions. Evidence was found for a hreshold for severe attack between 10^-4 and 10^-3 atm of SO₃ atmore » 700ºC.« less
https://doi.org/10.1007/s11085-013-9399-6

Similar Records