Final Project Report for project titled "Fluoroalkylphosphonic-acid-based proton conductors"
The overall objective of this research was to create new proton-conducting polymer electrolytes for use in energy conversion devices including hydrogen fuel cells that could operate at high temperatures (95-130 C) and under low relative humidity (< 50% RH) conditions. The new polymers were based on the fluoroalkylphosphonic and phosphinic acid (FPA) groups (see illustration below) which offer prospects for rapid proton transport by a proton-hopping mechanism similar to that which operates in phosphoric acid, a well-known proton-transporting electrolyte that is used in a class of hydrogen fuel cells that work well under the conditions noted above and are already commercially successful. The two specific project objectives were as follows: (1) synthesize and characterize new proton-conducting electrolytes based on the fluoroalkylphosphonic and phosphinic acid (FPA) functional groups; and (2) create and apply new computer models to study protonic conduction in FPA-based electrolytes. The project was successful in creating the desired polymer electrolytes and also a series of molecular model compounds which were used to study proton transport in FPA electrolytes in general. Computer models were created to study both structure and proton-transport dynamics in the electrolytes, particularly the molecular model compounds. Rapid proton transport by a hopping mechanism was found in many of the model compounds and correlations with transport rates with molecular structure were identified. Several polymeric analogs of FPA model compounds were prepared and studied, however FPA-based polymeric materials having very high protonic conductivities under either wet or dry conditions were not obtained. Several possible reasons for the failure of polymeric materials to exhibit the expected high protonic conductivities were identified, including a failure of the polymers to adopt the phase-separated secondary structure/morphology necessary for high proton conductivity, and an unexpected polymer crosslinking effect of acidic groups having two P-OH groups. The project has lent insight into how FPA groups transport protons in both liquid and polymeric forms, which provides guidance to future efforts to design and prepare future generations of proton-conducting polymer electrolytes for hydrogen fuel cells and other types of electrochemical energy conversion and storage devices.
- Research Organization:
- Clemson Univ., SC (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- FG36-06GO16031
- OSTI ID:
- 1030791
- Report Number(s):
- GO16031_Clemson_2011_FinalReport_SEC6; TRN: US201202%%371
- Country of Publication:
- United States
- Language:
- English
Similar Records
Protic Salt Polymer Membranes: High-Temperature Water-Free Proton-Conducting Membranes
SEI Stabilization of Si Anodes Via Conducting Polymer Encapsulation. Final Report
Related Subjects
30 DIRECT ENERGY CONVERSION
COMPUTERS
DESIGN
ELECTROCHEMICAL ENERGY CONVERSION
ELECTROLYTES
ENERGY CONVERSION
FUNCTIONALS
HUMIDITY
HYDROGEN FUEL CELLS
MOLECULAR MODELS
MOLECULAR STRUCTURE
PHOSPHINIC ACIDS
PHOSPHORIC ACID
POLYMERS
PROTON CONDUCTIVITY
PROTON TRANSPORT
PROTONS
STORAGE
TRANSPORT
Hydrogen fuel cells
electrolytes
membranes