Effect of process variables on the quality attributes of briquettes from wheat, oat, canola and barley

Conference · Mon Aug 01 00:00:00 EDT 2011

DOI:https://doi.org/10.13031/2013.37412· OSTI ID:1027895

Tumuluru, Jaya Shankar

Effect of process variables on the quality attributes of briquettes from wheat, oat, canola and barley straw Jaya Shankar Tumuluru*, L. G. Tabil, Y. Song, K. L. Iroba and V. Meda Biomass is a renewable energy source and environmentally friendly substitute for fossil fuels such as coal and petroleum products. Major limitation of biomass for successful energy application is its low bulk density, which makes it very difficult and costly to transport and handle. To overcome this limitation, biomass has to be densified. The commonly used technologies for densification of biomass are pelletization and briquetting. Briquetting offers many advantages at it can densify larger particles sizes of biomass at higher moisture contents. Briquetting is influenced by a number of feedstock and process variables such as moisture content, particle size distribution, and some operating variables such as temperature and densification pressure. In the present study, experiments were designed and conducted based on Box-Behnken design to produce briquettes using barley, wheat, canola and barley straws. A laboratory scale hydraulic briquette press was used for the present study. The experimental process variables and their levels used in the present study were pressure levels (7.5, 10, 12.5 MPa), three levels of temperature (90, 110, 130 C), at three moisture content levels (9, 12, 15% w.b.), and three levels of particle size (19.1, 25.04, 31.75 mm). The quality variables studied includes moisture content, initial density and final briquette density after two weeks of storage, size distribution index and durability. The raw biomass was initially chopped and size reduced using a hammer mill. The ground biomass was conditioned at different moisture contents and was further densified using laboratory hydraulic press. For each treatment combination, ten briquettes were manufactured at a residence time of about 30 s after compression pressure setpoint was achieved. After compression, the initial dimensions and the final dimensions after 2 weeks of storage in controlled environment of all the samples were measured. Durability, dimensional stability, and moisture content tests were conducted after two weeks of storage of the briquettes produced. Initial results indicated that moisture content played a significant role on briquettes durability, stability, and density. Low moisture content of the straws (7-12%) gave more durable briquettes. Briquette density increased with increasing pressure depending on the moisture content value. The axial expansion was more significant than the lateral expansion, which in some cases tended to be nil depending on the material and operating variables. Further data analysis is in progress in order to understand the significance of the process variables based on ANOVA. Regression models were developed to predict the changes in quality of briquettes with respect of the process variables under study. Keywords: Herbaceous biomass, densification, briquettes, density, durability, dimensional stability, ANOVA and regression equations

• Research Organization: Idaho National Lab. (INL), Idaho Falls, ID (United States)
• Sponsoring Organization: DOE - EE
• DOE Contract Number: DE-AC07-05ID14517
• OSTI ID: 1027895
• Report Number(s): INL/CON-10-20628; TRN: US201121%%625
• Resource Relation: Conference: ASABE Annual International Meeting,Louisville, Kentucky,08/07/2011,08/10/2011
• Country of Publication: United States
• Language: English

Related Subjects

01 COAL, LIGNITE, AND PEAT
02 PETROLEUM
09 BIOMASS FUELS
BARLEY
BIOMASS
BRIQUETTING
BULK DENSITY
COAL
COMPRESSION
DATA ANALYSIS
DIMENSIONS
DISTRIBUTION
FOSSIL FUELS
HYDRAULICS
MOISTURE
PARTICLE SIZE
PETROLEUM PRODUCTS
RENEWABLE ENERGY SOURCES
STABILITY
STORAGE
STRAW
TRANSPORT
WHEAT
biomass
briquettes
densification
Herbaceious biomass