Structural analysis of multiport riser 5A installation on tank 241SY101
The Tank 101-SY multiport riser assembly in the 241-SY-101 waste tank will replace the existing 42 inch riser with four smaller ports. Each smaller port can be used independently to access the tank interior with equipment and instruments needed to mitigate the concentration of hydrogen in the tank. This document provides a design report on the structural evaluation of the multiport riser assembly as well as its anchorage. The multiport riser assembly is a steel structure installed directly above the 42-inch riser and sealed at the existing riser flange. The assembly is structurally supported by the concrete pad placed around the 42 inch riser. The multiport riser assembly will provide two 8-inch penetrations, one 12-inch penetration and one 24-inch penetration. Each penetration will have a shielding plate. These penetrations will be used to insert equipment such as a sonic probe into the tank. In addition to normal loads, non-reactor Safety Class 1 structures, systems and components are to withstand the effects of extreme environmental loads including Design Basis Earthquake (DBE), Design Basis Wind (DBW), Design Basis Flood, Volcanic Eruptions and other abnormal loads considered on a case by case basis. Non-reactor Safety Class 2, 3 and 4 structures, systems and components are those that are not Safety Class 1 and are respectively specified as onsite safety related, occupational safety related and non-safety related items. The 241-SY-101 tank is considered as a non-reactor Safety Class 1 structure. The multiport riser assembly is considered as a non-reactor Safety Class 2 structure since it serves to contain the radioactive and toxic materials under normal operating conditions. However, the pressure relief doors provided on the assembly are considered as Safety Class 1 structures.
- Research Organization:
- Westinghouse Hanford Co., Richland, WA (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC06-87RL10930
- OSTI ID:
- 10187559
- Report Number(s):
- WHC-SD-WM-DA-161; ON: DE95001044; BR: 35AF11201/35AF11202; TRN: 94:021055
- Resource Relation:
- Other Information: PBD: 16 Sep 1994
- Country of Publication:
- United States
- Language:
- English
Similar Records
Multiport riser and flange assemblies acceptance test report
Structural analysis and evaluation of a mixer pump in a double-shell tank at the Hanford Site
Related Subjects
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
HANFORD RESERVATION
RADIOACTIVE WASTE STORAGE
MATERIALS HANDLING EQUIPMENT
SAFETY ANALYSIS
DESIGN
TANKS
DEGASSING
MEASURING INSTRUMENTS
INSTALLATION
SAFETY STANDARDS
COMPILED DATA
052002
054000
WASTE DISPOSAL AND STORAGE
HEALTH AND SAFETY