Frequency-feedback tuning for single-cell cavity under rf heating
A tuning system is described that is being used to match the source frequency of a high-power klystron on the resonant frequency of the prototype single-cell cavity for the 7-GeV Advance Photon Source (APS) storage ring. Typically a water-cooled piston tuner is required to adjust the reactive component of the cavity`s impedance to minimize reflected power back to the RF drive source. As the cavity watts expand due to RF heating, the resonant frequency decreases. Adjusting the source frequency to follow the cavity resonant frequency is a convenient method used to condition the cavity (for vacuum) at high power levels, in this case, 1 MV gap voltage at 100 kW power level. The tuning system consists of two coupling ports, a phase detector, a digitizing I/O system, and a DC coupled FM-modulated RF source. Proportional Integral Derivative (PID) loop parameters for the Experimental Physics and Industrial Control System (EPICS) software are calculated, and data is presented showing the damped response to peturbations on the loop. The timing system presented here does not need water-cooling, has no moving parts to wear out, and has an inherently faster response time. Its one limitation is the digitizing sampling rate. The only limitation in tuning range is the bandwidth of the RF source.
- Research Organization:
- Argonne National Lab., IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 10178288
- Report Number(s):
- ANL/ASD/CP-78342; CONF-930511-349; ON: DE93018566; TRN: 93:018973
- Resource Relation:
- Conference: PAC `93: international particle accelerator conference,Washington, DC (United States),17-20 May 1993; Other Information: PBD: [1993]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Low-power RF tuning of the Spallation Neutron Source warm LINAC structures
Investigation of an Ultrafast Harmonic Resonant RF Kicker