Repair welding of fusion reactor components. Second year technical report
Experiments have shown that irradiated Type 316 stainless steel is susceptible to heat-affected-zone (HAZ) cracking upon cooling when welded using the gas tungsten arc (GTA) process under lateral constraint. The cracking has been hypothesized to be caused by stress-assisted helium bubble growth and rupture at grain boundaries. This study utilized an experimental welding setup which enabled different compressive stresses to be applied to the plates during welding. Autogenous GTA welds were produced in Type 316 stainless steel doped with 256 appm helium. The application of a compressive stress, 55 MPa, during welding suppressed the previously observed catastrophic cracking. Detailed examinations conducted after welding showed a dramatic change in helium bubble morphology. Grain boundary bubble growth along directions parallel to the weld was suppressed. Results suggest that stress-modified welding techniques may be used to suppress or eliminate helium-induced cracking during joining of irradiated materials.
- Research Organization:
- Auburn Univ., AL (United States). Dept. of Mechanical Engineering
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- FG05-91ER54134
- OSTI ID:
- 10156574
- Report Number(s):
- DOE/ER/54134-2; ON: DE93015073
- Resource Relation:
- Other Information: PBD: 15 May 1993
- Country of Publication:
- United States
- Language:
- English
Similar Records
Technique to eliminate helium induced weld cracking in stainless steels
Stress modified welding process for irradiated materials