Testing of hollow clay tile masonry prisms
Conference
·
OSTI ID:10106600
This paper presents test results of 610-mm wide (24-in.) by 1219-mm high (48-in.) by 203-or 330-mm (8- or 13-in.) thick prisms constructed of hollow clay tiles. Three prisms were extracted fro existing hollow clay title walls and 69 were constructed in laboratories at The University of Tennessee and the National Institute of Standards and Technology (NIST) in Gaithersburg, Maryland. Modulus of Elasticity, E, and compressive strength f{prime}{sub m} were calculated from the results.
- Research Organization:
- Oak Ridge Y-12 Plant, TN (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC05-84OS21400
- OSTI ID:
- 10106600
- Report Number(s):
- Y/EN-4684; CONF-940466-1; ON: DE94003680
- Resource Relation:
- Conference: American Society of Civil Engineers (ASCE) structures congress,Atlanta, GA (United States),Apr 1994; Other Information: PBD: 15 Oct 1993
- Country of Publication:
- United States
- Language:
- English
Similar Records
Hollow clay tile wall test program: Procedures and fixtures for removing, capping, handling, and testing masonry prisms and flexural bond specimens
Hollow clay tile wall test program: Procedures and fixtures for removing, capping, handling, and testing masonry prisms and flexural bond specimens
Test procedure for prism compression testing of laboratory built prisms. [Hollow clay tile walls]
Technical Report
·
Wed Apr 01 00:00:00 EST 1992
·
OSTI ID:10106600
Hollow clay tile wall test program: Procedures and fixtures for removing, capping, handling, and testing masonry prisms and flexural bond specimens
Technical Report
·
Wed Apr 01 00:00:00 EST 1992
·
OSTI ID:10106600
Test procedure for prism compression testing of laboratory built prisms. [Hollow clay tile walls]
Technical Report
·
Wed Apr 01 00:00:00 EST 1992
·
OSTI ID:10106600