skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Mechanics of layered anisotropic poroelastic media with applications to effective stress for fluid permeability

Journal Article · · International Journal of Engineering Sciences
OSTI ID:1001643

The mechanics of vertically layered porous media has some similarities to and some differences from the more typical layered analysis for purely elastic media. Assuming welded solid contact at the solid-solid interfaces implies the usual continuity conditions, which are continuity of the vertical (layering direction) stress components and the horizontal strain components. These conditions are valid for both elastic and poroelastic media. Differences arise through the conditions for the pore pressure and the increment of fluid content in the context of fluid-saturated porous media. The two distinct conditions most often considered between any pair of contiguous layers are: (1) an undrained fluid condition at the interface, meaning that the increment of fluid content is zero (i.e., {delta}{zeta} = 0), or (2) fluid pressure continuity at the interface, implying that the change in fluid pressure is zero across the interface (i.e., {delta}p{sub f} = 0). Depending on the types of measurements being made on the system and the pertinent boundary conditions for these measurements, either (or neither) of these two conditions might be directly pertinent. But these conditions are sufficient nevertheless to be used as thought experiments to determine the expected values of all the poroelastic coefficients. For quasi-static mechanical changes over long time periods, we expect drained conditions to hold, so the pressure must then be continuous. For high frequency wave propagation, the pore-fluid typically acts as if it were undrained (or very nearly so), with vanishing of the fluid increment at the boundaries being appropriate. Poroelastic analysis of both these end-member cases is discussed, and the general equations for a variety of applications to heterogeneous porous media are developed. In particular, effective stress for the fluid permeability of such poroelastic systems is considered; fluid permeabilities characteristic of granular media or tubular pore shapes are treated in some detail, as are permeabilities of some of the simpler types of fractured materials.

Research Organization:
Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
Sponsoring Organization:
Earth Sciences Division
DOE Contract Number:
DE-AC02-05CH11231
OSTI ID:
1001643
Report Number(s):
LBNL-3589E; IJESAN; TRN: US201102%%367
Journal Information:
International Journal of Engineering Sciences, Vol. 49, Issue 1; Related Information: Journal Publication Date: 2011; ISSN 0020-7225
Country of Publication:
United States
Language:
English

Similar Records

Poroelastic measurement schemes resulting in complete data sets for granular and other anisotropic porous media
Journal Article · Fri Nov 20 00:00:00 EST 2009 · International Journal of Engineering Sciences · OSTI ID:1001643

Interaction of a normally-incident plane wave with a nonlinear poroelastic fracture
Journal Article · Tue Sep 24 00:00:00 EDT 2019 · Journal of the Acoustical Society of America · OSTI ID:1001643

Estimates and Rigorous Bounds on Pore-Fluid Enhanced Shear Modulus in Poroelastic Media with Hard and Soft Anisotropy
Journal Article · Mon Jan 24 00:00:00 EST 2005 · International Journal of Damage Mechanics · OSTI ID:1001643