Relation of thermal conductivity with process induced anisotropic void system in EB-PVD PYSZ thermal barrier coatings.
Thermal barrier coatings (TBCs) deposited by Electron-beam physical deposition (EB-PVD) protect the turbine blades situated at the high pressure sector of the aircraft and stationary turbines. It is an important task to uphold low thermal conductivity in TBCs during long-term service at elevated temperatures. One of the most promising methods to fulfil this task is to optimize the properties of PYSZ-based ,TBC by tailoring its microstructure. Thermal conductivity of the EB-PVD produced PYSZ TBCs is influenced mainly by the size, shape, orientation and volume of the various types of porosity present in the coatings. These pores can be classified as open (inter-columnar and between feather arms gaps) and closed (intra-columnar pores). Since such pores are located within the three-dimensionally deposited columns and enclose large differences in their sizes, shapes, distribution and anisotropy, the accessibility for their characterization is very complex and requires the use of sophisticated methods. In this work, three different EB-PVD TBC microstructures were manufactured by varying the process parameters, yielding various characteristics of their pores. The corresponding thermal conductivities in as-coated state and after ageing at 1100C/1h and 100h were measured via Laser Flash Analysis Method (LFA). The pore characteristics and their individual effect on the thermal conductivity are analysed by USAXS which is supported by subsequent modelling and LFA methods, respectively. Evident differences in the thermal conductivity values of each microstructure were found in as-coated and aged conditions. In summary, broader columns introduce higher values in thermal conductivity. In general, thermal conductivity increases after ageing for all three investigated microstructures, although those with initial smaller pore surface area show smaller changes.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- DE-AC02-06CH11357
- OSTI ID:
- 982020
- Report Number(s):
- ANL/XFD/CP-117973; TRN: US201013%%872
- Journal Information:
- Ceram. Eng. Sci. Proc., Vol. 27, Issue 3 ; 2007; Conference: 30th Annual International Conference & Exposition on Advanced Ceramics and Composites; Jan. 22, 2006 - Jan. 27, 2006; Cocoa Beach, FL
- Country of Publication:
- United States
- Language:
- ENGLISH
Similar Records
The effect of thermal aging on the thermal conductivity of plasma sprayed and EB-PVD thermal barrier coatings
Thermocyclic behavior of variously stabilized EB-PVD thermal barrier coatings