The IPNS second harmonic RF upgrade.
The intense pulsed neutron source (IPNS) rapid cycling synchrotron (RCS) is used to accelerate protons from 50 MeV to 450 MeV, at a repetition rate of 30 Hz. The original ring design included two identical rf systems, each consisting of an accelerating cavity, cavity bias supply, power amplifiers and low-level analog electronics. The original cavities are located 180 degrees apart in the ring and provide a total peak accelerating voltage of {approx}21 kV over the 2.21-MHz to 5.14-MHz revolution frequency sweep. A third rf system has been constructed and installed in the RCS. The third rf system is capable of operating at the fundamental revolution frequency for the entire acceleration cycle, providing an additional peak accelerating voltage of up to {approx}11 kV, or at the second harmonic of the revolution frequency for the first {approx}4 ms of the acceleration cycle, providing an additional peak voltage of up to {approx}11 kV for bunch shape control. We describe here the hardware implementation and operation to date of the third rf cavity in the second harmonic mode.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- DE-AC02-06CH11357
- OSTI ID:
- 972590
- Report Number(s):
- ANL/ASD/CP-59551; TRN: US1001635
- Resource Relation:
- Conference: Particle Accelerator Conference (PAC07); Jun. 25, 2007 - Jun. 29, 2007; Albuquerque, NM
- Country of Publication:
- United States
- Language:
- ENGLISH
Similar Records
Observations of UHF oscillations in the IPNS RCS proton bunch. PROTON BUNCH
The investigation of injection timing for the IPNS RCS.