Adhesion Issues with Polymer/Oxide Barrier Coatings on Organic Displays
Multilayer polymer/oxide coatings are being developed to protect sensitive organic display devices, such as OLEDs, from oxygen and water vapor permeation. The coatings have permeation levels ~ 10-6 g/m2/d for water vapor and ~10-6 cc/m2/d for oxygen, and are deposited by vacuum polymer technology. The coatings consist of either a base Al2O3 or acrylate polymer adhesion layer followed by alternating Al2O3/polymer layers. The polymer is used to decouple the 30 nm-thick Al2O3 barrier layers. Adhesion of the barrier coating to the substrate and display device is critical for the operating lifetime of the device. The substrate material could be any transparent flexible plastic. The coating technology can also be used to encapsulate organic-based electronic devices to protect them from atmospheric degradation. Plasma pretreatment is also needed for good adhesion to the substrate, but if it is too aggressive, it will damage the organic display device. We report on the effects of plasma treatment on the adhesion of barrier coatings to plastic substrates and the performance of OLED devices after plasma treatment and barrier coating deposition. We find that initial OLED performance is not significantly affected by the deposition process and plasma treatment, as demonstrated by luminosity and I-V curves.
- Research Organization:
- Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC05-76RL01830
- OSTI ID:
- 949154
- Report Number(s):
- PNNL-SA-42917; TRN: US200907%%341
- Resource Relation:
- Conference: Adhesion Aspects of Thin Films, 2:91-102
- Country of Publication:
- United States
- Language:
- English
Similar Records
Micro- and Nanostructured Materials for Active Devices and Molecular Electronics
Global and local planarization of surface roughness by chemical vapor deposition of organosilicon polymer for barrier applications