ORNL/IAT ARMATURE DIAGNOSTICS DEMONSTRATION TEST REPORT
- ORNL
- Institute for Advanced Technology, Austin, TX
- Diditco, Inc., Knoxville
This test established feasibility for 'on the fly' temperature measurements of rail gun projectiles. In addition, an approach for projectile velocity measurement was also demonstrated. Insight was gained into other useful optical and fiberoptic diagnostic approaches. Instantaneous diagnostics could be critical for achieving further improvements in rail gun operation. They have the potential to enable design enhancements by providing information on the state of the armature and its relationship to the rail as it proceeds down the bore. To that end, the following was accomplished: (1) Optical fibers successfully delivered optical excitation and returned reflective and fluorescence signals as desired. (2) Luminescent coatings survived multiple firings--approximately 40 shots. (3) Optical triggering effectively synchronized an ultraviolet laser pulse to strike the moving armature. (4) Velocity measurements were successfully accomplished by either triggering on the armature front edge using two red diode lasers or by using a single laser and grooved marks a known distance apart on the armature surface. (5) Velocities ranged from 19 to 88 m/s. (6) Temperatures of 30 to 92 C were measured with a precision of about 2 C-: (a) This precision was achieved with a single laser shot and (b) Motion effect was observed but a methodology adequately corrected the result. The correction was only about 2 C. (7) Adequate signal-to-noise and measurement precision was achieved with a single laser shot.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE; Work for Others (WFO)
- DOE Contract Number:
- DE-AC05-00OR22725
- OSTI ID:
- 930855
- Report Number(s):
- ORNL/TM-2006/595; WN0219080; TRN: US200813%%289
- Country of Publication:
- United States
- Language:
- English
Similar Records
In-Flight Armature Diagnostics
Tandem hybrid/plasma armature performance