Fracture toughness of stainless steel welds
The effects of temperature, composition and weld-process variations on the fracture toughness behavior for Types 308 and 16-8-2 stainless steel (SS) welds were examined using the multiple-specimen J/sub R/-curve procedure. Fracture characteristics were found to be dependent on temperature and weld process but not on filler material. Gas-tungsten-arc (GTA) welds exhibited the highest fracture toughness, a shielded metal-arc (SMA) weld exhibited an intermediate toughness and submerged-arc (SA) welds yielded the lowest toughness. Minimum-expected fracture properties were defined from lower-bound J/sub c/ and tearing modulus values generated here and in previous studies. Fractographic examination revealed that microvoid coalescence was the operative fracture mechanism for all welds. Second phase particles of manganese silicide were found to be detrimental to the ductile fracture behavior because they separated from the matrix during the initial stages of plastic straining. In SA welds, the high density of inclusions resulting from silicon pickup from the flux promoted premature dimple rupture. The weld produced by the SMA process contained substantially less manganese silicide, while GTA welds contained no silicide inclusions. Delta ferrite particles present in all welds were substantially more resistant to local failure than the silicide phase. In welds containing little or no manganese silicide, delta ferrite particles initiated microvoid coalescence but only after extensive plastic straining.
- Research Organization:
- Hanford Engineering Development Lab., Richland, WA (USA)
- DOE Contract Number:
- AC06-76FF02170
- OSTI ID:
- 7123198
- Report Number(s):
- HEDL-SA-3319-FP; CONF-8607107-1; ON: DE87004085
- Resource Relation:
- Conference: 19. national symposium on fracture mechanics, San Antonio, TX, USA, 1 Jul 1986; Other Information: Portions of this document are illegible in microfiche products
- Country of Publication:
- United States
- Language:
- English
Similar Records
Methodology for Estimating Thermal and Neutron Embrittlement of Austenitic Stainless Steel Welds During Service in Light Water Reactors
Fracture toughness of irradiated stainless steel alloys
Related Subjects
22 GENERAL STUDIES OF NUCLEAR REACTORS
STAINLESS STEEL-16-8-2
FRACTURE PROPERTIES
WELDED JOINTS
STAINLESS STEEL-308
AUSTENITIC STEELS
FRACTURE MECHANICS
GAS METAL-ARC WELDING
GAS TUNGSTEN-ARC WELDING
PRESSURE VESSELS
REACTOR MATERIALS
STRAINS
ALLOYS
ARC WELDING
CHROMIUM ALLOYS
CHROMIUM STEELS
CHROMIUM-NICKEL STEELS
CONTAINERS
CORROSION RESISTANT ALLOYS
FABRICATION
IRON ALLOYS
IRON BASE ALLOYS
JOINING
JOINTS
MATERIALS
MECHANICAL PROPERTIES
MECHANICS
NICKEL ALLOYS
STAINLESS STEELS
STEELS
WELDING
360103* - Metals & Alloys- Mechanical Properties
220200 - Nuclear Reactor Technology- Components & Accessories