Part 2: The creep behavior of Ti-Al-Nb O + bcc orthorhombic alloys
- Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Mechanical Engineering
- Air Force Research Lab., Wright-Patterson AFB, OH (United States)
The intermediate-temperature (650 C to 760 C) creep behavior of orthorhombic (O) + bcc alloys containing 50 at. pct Ti was studied. Ti-25Al-25Nb, Ti-23Al-27Nb, and Ti-12Al-38Nb ingots were processed and heat treated to obtain a wide variety of microstructures. Creep deformation mechanisms and the effects of grain size, phase volume fraction, tension vs compression and aging on creep rates were examined. Unaged microstructures, which transformed during the creep experiments, exhibited larger primary creep strains than transformed microstructure, which were crept after long-term aging. The deformation observations and calculated creep exponents and activation energies suggested that separate creep mechanisms, dependent on the applied stress level, were dominating the secondary creep behavior. Coble creep characteristics, including relatively low activation energies and dislocation densities as well as stress exponents close to unity, were exhibited at low applied stresses. Experiments on fiducially marked specimens indicated that grain-boundary sliding was occurring for intermediate applied stresses. In this regime, the minimum creep rates were proportional to the applied stress squared and inversely proportional to the grain size. Overall, the minimum creep rates were dependent on microstructure and stress. Within the low-to-intermediate stress regimes, subtransus processed and heat-treated microstructures, which contained much finer grain sizes than supertransus microstructures, exhibited the poorest creep resistance. The influence of grain size was not as significant within the high-stress regime. It is shown that for low-to-intermediate stress levels, grain size is the dominant microstructural feature influencing the creep behavior of O + bcc alloys.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 684454
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Vol. 30, Issue 9; Other Information: PBD: Sep 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modulated two-domain structure of the O phase formed in the Ti-25Al-12. 5Nb (at %) alloy
The creep behavior of gamma alloy Ti-46.5Al-3Nb-2Cr-0.2W (alloy K5) in two microstructural conditions