Development of silicon carbide composites for fusion
- Rensselaer Polytechnic Institute, Troy, NY (United States)
The use of silicon carbide composites for structural materials is of growing interest in the fusion community. However, radiation effects in these materials are virtually unexplored, and the general state of ceramic matrix composites for nonnuclear applications is still in its infancy. Research into the radiation response of the most popular silicon carbide composite, namely, the chemically vapor-deposited (CVD) SiC-carbon-Nicalon fiber system is discussed. Three areas of interest are the stability of the fiber and matrix materials, the stability of the fiber-matrix interface, and the true activation of these [open quotes]reduced activity[close quotes] materials. Two methods are presented that quantitatively measure the effect of radiation on fiber and matrix elastic modulus as well as the fiber-matrix interfacial strength. The results of these studies show that the factor limiting the radiation performance of the CVD SiC-carbon-Nicalon system is degradation of the Nicalon fiber, which leads to a weakened carbon interface. The activity of these composites is significantly higher than expected and is dominated by impurity isotopes. 52 refs., 12 figs., 3 tabs.
- OSTI ID:
- 6799808
- Journal Information:
- Fusion Technology; (United States), Vol. 24:1; ISSN 0748-1896
- Country of Publication:
- United States
- Language:
- English
Similar Records
The Effect of Excess Carbon on the Crystallographic, Microstructural, and Mechanical Properties of CVD Silicon Carbide Fibers
Mechanical properties of SiC composites neutron irradiated under light water reactor relevant temperature and dose conditions