skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Oxide thickness measurement technique for duplex-layer Zircaloy-4 cladding

Conference · · Transactions of the American Nuclear Society; (United States)
OSTI ID:6672489
;  [1]
  1. Siemens Nuclear Power Corp., Richland, WA (United States)

Siemens Nuclear Power Corporation (SNP) is investigating the use of duplex-layer Zircaloy-4 tubing to improve the waterside corrosion resistance of cladding for high-burnup pressurized water reactor (PWR) fuel designs. Standard SNP PWR cladding is typically 0.762-mm (0.030-in.)-thick Zircaloy-4. The SNP duplex cladding is nominally 0.660-mm (0.026-in.)-thick Zircalloy-4 with an [approximately]0.102-mm (0.004-in.) outer layer of another, more corrosion-resistant, zirconium-based alloy. It is common industry practice to monitor the in-reactor corrosion behavior of Zircaloy cladding by using an eddy-current lift-off' technique to measure the oxide thickness on the outer surface of the fuel cladding. The test program evaluated three different cladding samples, all with the same outer diameter and wall thickness: Zircaloy-4 and duplex clad types D2 and D4.

OSTI ID:
6672489
Report Number(s):
CONF-921102-; CODEN: TANSAO
Journal Information:
Transactions of the American Nuclear Society; (United States), Vol. 66; Conference: Joint American Nuclear Society (ANS)/European Nuclear Society (ENS) international meeting on fifty years of controlled nuclear chain reaction: past, present, and future, Chicago, IL (United States), 15-20 Nov 1992; ISSN 0003-018X
Country of Publication:
United States
Language:
English