Effects of gravity level during directional solidification on the microstructure of hypermonotectic Al-In-Sn alloys
Five hypermonotectic Al-In-Sn compositions were directionally solidified in a Bridgman-type furnace at normal gravity and during aircraft low-gravity maneuvers. The tendency of the Al-30In alloy to form an indium-rich band at the start of unidirectional growth (SUG) made it difficult to study the integration of L/sub 2/into the solidification interface. Hypermonotectic compositions closer to monotectic slightly hypermonotectic caused only a partial band on L/sub 2/to form at SUG and allowed the study of such variables as gravity, composition, and monotectic dome height on integration of excess L /sub 2/into the solid plus L/sub 2/interface. It was found that formation of aligned composite structures for the Al-In-Sn system is not only a function of G and R but also of the degree to which the composition varies from monotectic. Most of the aligned fibrous structures formed from hypermonotectic Al-In-Sn had spacings that were of the order of irregular fibrous structures reported for on monotectic Al-In-Sn. The spacings for the large fibers and aligned globules found for ground and low-gravity processed Al-In-18-Sn-22, respectively, were significantly larger than the others measured and were of the order expected for cell spacings under the growth conditions utilized. It was found that the integration into the solidification front of excess L/sub 2/in low gravity was a function of the Sn composition of the alloy.
- Research Organization:
- National Aeronautics and Space Administration, Huntsville, AL (USA). George C. Marshall Space Flight Center
- OSTI ID:
- 6587456
- Report Number(s):
- N-87-16901; NASA-TM-86573; NAS-1.15:86573; TRN: 87-018388
- Country of Publication:
- United States
- Language:
- English
Similar Records
Solidification, growth mechanisms, and associated properties of Al-Si and magnesium lightweight casting alloys
Transport processes in directional solidification and their effects on microstructure development