Mechanical characteristics of pipeline joints

Conference · Fri Jun 01 00:00:00 EDT 1984 · Am. Soc. Mech. Eng., (Pap.); (United States)

OSTI ID:6354893

Singhal, A C

Axial pull-out, bending and torque-rotation stiffness and capacity data and equations for underground torsional behavior are provided for utility pipelines using rubber gasked joints. Analytically, predicted values have been compared with the experimental data with satisfactory results. Axial pull-out for utility pipes occurs at 1.2 in (30. mm) displacement. Metal-to-metal binding takes place at very small axial push-in or after 4 degrees bending rotation of the joint. Failure mechanisms have been explained, and a modified joint which could reduce high seismic stress buildup is outlined.

• Research Organization: Department of Civil Engineering, Arizona State University, Tempe, Arizona
• OSTI ID: 6354893
• Report Number(s): CONF-840647-
• Journal Information: Am. Soc. Mech. Eng., (Pap.); (United States), Vol. 84-PVP-75; Conference: ASME pressure vessel and piping conference, San Antonio, TX, USA, 17 Jun 1984
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING
PIPELINES
MECHANICAL PROPERTIES
BENDING
EXPANSION JOINTS
ROTATION
RUBBERS
SEISMIC EFFECTS
STRESSES
TORQUE
TORSION
UNDERGROUND
ELASTOMERS
JOINTS
LEVELS
MOTION
ORGANIC COMPOUNDS
ORGANIC POLYMERS
POLYMERS
420205* - Engineering- Transport & Storage Facilities- (1980-)