Conceptual design and economic analysis for the manufacture of an ultra-clean coal/water mixture. Final report
This is the final report on the conceptual process design as part of the project on The Development, Testing, and Manufacture of an Ultra-Clean Coal/Water Mixture (UCCWM) conducted under sponsorship of Morgantown Energy Technology Center of the US Department of Energy. The objective of the conceptual process design is to develop the cost production of an ultra-clean coal/water mixture based upon its specification of less than 1% ash, less than 44 micron top particle size with minimum 60% coal loading. To meet the required specification, Elkhorn seam coal, one of the lowest inherent ash coals, which is produced in the Eastern Kentucky area, was selected and cleaned by a two-stage physical process: (a) heavy media washer near 1.30 specific gravity separation, and (b) column flotation after grinding the heavy media washer product by a ball mill to -100 mesh. In order to micronize the coal/water mixture, the flotation product was processed through a stirred ball mill. The capacity basis of the coal cleaning and slurry manufacturing plant was to supply the UCCWM fuel for operating a typical 100 MW gas turbine continuously. The raw coal feed rate to the cleaning plant was 300 tons per hour and the final UCCWM fuel production was 70 tons per hour by dry coal basis. In addition to that, two by-products, boiler grade CWM and 1/4 inch x 0 coal are obtained. Economic analysis showed that the total capital cost for the plant was $30,614,000 and the final gas turbine grade CWM cost estimate was $3.96/MBtu in 1984 dollars F.O.B. plant. If we assume that the potential market for the fuel is located in the Northeastern United States, the delivered fuel is estimated to be $5.44/MBtu. 2 references, 1 figure, 9 tables.
- Research Organization:
- United Coal Co., Bristol, VA (USA)
- DOE Contract Number:
- AC21-83MC20122
- OSTI ID:
- 6253641
- Report Number(s):
- DOE/MC/20122-T1; ON: DE85005326
- Resource Relation:
- Other Information: Portions are illegible in microfiche products
- Country of Publication:
- United States
- Language:
- English
Similar Records
ENGINEERING DEVELOPMENT OF ADVANCED PHYSICAL FINE COAL CLEANING FOR PREMIUM FUEL APPLICATIONS
Determinations of coal water mixture properties for predictions of products of combustion characteristics
Related Subjects
FUEL SLURRIES
CHEMICAL PREPARATION
COST
SPECIFICATIONS
COAL
COAL PREPARATION
FLOTATION
GAS TURBINES
HEAVY MEDIA SEPARATION
MIXTURES
WATER
CARBONACEOUS MATERIALS
DISPERSIONS
ENERGY SOURCES
FOSSIL FUELS
FUELS
HYDROGEN COMPOUNDS
MACHINERY
MATERIALS
OXYGEN COMPOUNDS
SEPARATION PROCESSES
SLURRIES
SUSPENSIONS
SYNTHESIS
TURBINES
TURBOMACHINERY
013000* - Coal
Lignite
& Peat- Transport
Handling
& Storage