Brittle fracture initiation associated with the strain localization in a heat-affected zone of a low carbon steels
- Waseda Univ., Tokyo (Japan). Dept. of Materials Science and Engineering
Brittle fracture initiation in the ductile-brittle fracture transition region in the heat-affected zone (HAZ) of weldments of a low carbon steel has been investigated. Consistent with the previous results from blunt notch Charpy tests, brittle fracture initiation was observed in the case of J-integral tests to take place at the intersection of small bainitic ferrite grains of different orientations within a mixed area of bainitic ferrite and quasipolygonal ferrite in proximity to the boundary between a coarse bainitic ferrite. Partial load drop during loading, pop-in phenomena, in fracture mechanics tests in the low-temperature region is caused by essentially the same mechanism as for unstable brittle fracture initiation. Inhomogeneous microstructure in the HAZ gives rise to intense strain localizations in the mixed area of bainitic ferrite and quasipolygonal ferrite due to the constraint of plastic deformation therein and may produce accumulated defects that form an incipient crack for the brittle fracture. Partial load drop proceeds in association with repetitive initiations of brittle facets and their ductile linking. The strong temperature dependence of the magnitude of partial load drop is likely to show that the temperature dependence of the brittle fracture initiation is controlled by the first initiation of a brittle facet and the ductile linking with the following induced facets. Existence of coarse bainitic ferrite grains is a prerequisite for the extension of an incipient crack.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 611586
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Vol. 29, Issue 2; Other Information: PBD: Feb 1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effect of stress and temperature on mode of fracture after reheat cracking
Further study on the mechanism of the ductile-to-brittle fracture transition in C-Mn base and weld steel