Sodium cleaning procedures for PEC prototype mechanisms
At Casaccia's Energy Research Center (CRE) of the Italian Commission for Nuclear and Alternative Energy Sources (ENEA), within the scope of testing activities for penetrating structures (mechanisms) of the Prova Elementi di Combustibile (PEC) reactor plug and of operating procedure acquisition for the PEC itself, a facility for the cleaning of mechanisms after in-sodium testing has been in operation for a number of years. The first phase of a component cleaning program is under way, based on the use of am organic solvent (2-butoxy-ethanol = ethylene glycol monobutyl ether = Butylcellosolve) and atomized water. Characterization activities were carried out in the laboratory on 2butoxy-ethanol, and the sodium-2-butoxy-ethanol reaction rate was measured at from 35 to 60/sup 0/C. A cleaning procedure for the prototypes of PEC mechanisms was defined after carrying out in-sodium test cycles. The final procedure used to clean the PEC mechanisms was developed by successive steps, and the entire task was divided as follows: cleaning facility correspondence check; effectiveness of alcohol versus aqueous cleaning methods; effectiveness of vacuum procedure; and effectiveness of the procedure for flood and alternate cycles of vacuum and pressurization on the 2-butoxy-ethanol liquid surface. The overall results of the testing have been used as the basis for determining a complete cleaning procedure suitable for all prototypes of the PEC mechanisms. The method selected is based on the utilization of 2-butoxy-ethanol. The nebulized water method is being used at present at Casaccia-CRE for cleaning other components with large values for the ratio of surface area to total sodium quantity. Nevertheless, a study is scheduled of a method using atomized water and carbon dioxide for the test cleaning of the fuel charge machine prototype.
- Research Organization:
- Dipartimento Reattori Veloci Divisione Ingegneria Sperimentale, Servizio Tecnologie del Sodio Centro Ricerche Energia Casaccia, Rome
- OSTI ID:
- 5986736
- Journal Information:
- Nucl. Technol.; (United States), Vol. 70:3
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluation of CATHARE 2 V1.3 capability to simulate the performance of automatic depressurization systems in PWRs
A microwave system to scarify concrete surfaces: Development and testing
Related Subjects
ORGANIC SOLVENTS
MATERIALS TESTING
REACTOR COMPONENTS
SURFACE CLEANING
SODIUM
REMOVAL
AQUEOUS SOLUTIONS
BUTYL ETHER
CHEMICAL REACTION KINETICS
COMPARATIVE EVALUATIONS
DECONTAMINATION
ETHANOL
GLYCOLS
ITALIAN ORGANIZATIONS
PEC BRASIMONE REACTOR
ALCOHOLS
ALKALI METALS
BREEDER REACTORS
CLEANING
DISPERSIONS
ELEMENTS
EPITHERMAL REACTORS
ETHERS
FAST REACTORS
FBR TYPE REACTORS
HYDROXY COMPOUNDS
KINETICS
METALS
MIXTURES
NATIONAL ORGANIZATIONS
ORGANIC COMPOUNDS
ORGANIC OXYGEN COMPOUNDS
POWER REACTORS
REACTION KINETICS
REACTORS
SOLUTIONS
SOLVENTS
SURFACE FINISHING
TESTING
210500* - Power Reactors
Breeding