The use of organic coatings to promote dropwise condensation of steam

Journal Article · Sat Aug 01 00:00:00 EDT 1987 · Journal of Heat Transfer (Transactions of the ASME (American Society of Mechanical Engineers), Series C); (United States)

DOI:https://doi.org/10.1115/1.3248156· OSTI ID:5939783

Holden, K M; Wanniarachchi, A S; Marto, P J; Boone, D H ^[1]; Rose, J W ^[2]

---

1. Naval Postgraduate School, Monterey, CA (United States)
2. Univ. of London (England)

Fourteen polymer coatings were evaluated for their ability to promote and sustain dropwise condensation of steam. Nine of the coatings employed a fluoropolymer as a major constituent; four employed hydrocarbons and one a silicone. Each coating was applied to 25-mm-square by approximately 1-mm-thick metal substrates of brass, copper, copper-nickel, and titanium. While exposed to steam at atmospheric pressure, each coating was visually evaluated for its ability to promote dropwise condensation. Observations were also conduction over a period of 22,000 hr. Hardness and adhesion tests were performed on selected specimens, On the basis of sustained performance, six coatings were selected for application to the outside of 19-mm-dia copper tubes in order to perform a heat transfer evaluation. These tubes were mounted horizontally in a separate apparatus through which steam flowed vertically downward. Steam-side heat transfer coefficients were inferred from overall measurements. Test results indicate that the steam-side heat transfer coefficient can be increased by a factor of five to eight through the use of polymer coatings to promote dropwise condensation.

• OSTI ID: 5939783
• Journal Information: Journal of Heat Transfer (Transactions of the ASME (American Society of Mechanical Engineers), Series C); (United States), Vol. 109:3; ISSN 0022-1481
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING
COATINGS
HEAT TRANSFER
STEAM
DROPWISE CONDENSATION
BRASS
COPPER
COPPER ALLOYS
HYDROCARBONS
ORGANIC FLUORINE COMPOUNDS
PERFORMANCE TESTING
POLYMERS
SILICON
TITANIUM
ALLOYS
COPPER BASE ALLOYS
ELEMENTS
ENERGY TRANSFER
METALS
ORGANIC COMPOUNDS
ORGANIC HALOGEN COMPOUNDS
SEMIMETALS
TESTING
TRANSITION ELEMENTS
VAPOR CONDENSATION
ZINC ALLOYS
420400* - Engineering- Heat Transfer & Fluid Flow