skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Calibration and characterization of Bayard--Alpert gauges operating in high magnetic fields

Journal Article · · J. Vac. Sci. Technol., A; (United States)
DOI:https://doi.org/10.1116/1.573967· OSTI ID:5725947

Standard Bayard--Alpert gauges have been successfully operated for several months in 0.3--0.7 T magnetic fields at eleven locations near the plasma edge of the Tandem Mirror Experiment-Upgrade (TMX-U). After individual calibration in the local TMX-U magnetic field, the gauges clearly measure gas density. One of these eleven gauges has been studied extensively and has maintained calibration within 12% during this period of operation. All gauge filaments are tungsten and are heated with direct current. The gauge housing allows operation in the low density plasma outside the limiter radius by thermalizing the neutral gas that enters the gauge and by preventing plasma from entering the gauge. Changing the orientation of the gauge with respect to the magnetic field changes the gauge calibration, or effective sensitivity, by as much as a factor of 100. Only some orientations of the filament collector plane with respect to the magnetic field direction allow calibrated operation as a pressure gauge. This range of angles is approximately from 20/sup 0/ to 50/sup 0/. Each of the eleven gauges was oriented to produce a usable sensitivity, then calibrated for the magnetic field effects at that position. After initial operation in the magnetic field, a small recalibration of less than 10% for permanent filament distortion was necessary for the unshielded gauge. For D/sub 2/, CH/sub 4/, X/sub e/ and Kr gas, the measured recalibration factor to the gauge sensitivity in the same high magnetic field varied only 16% rms about the average of 9.7 for the unshielded gauge. Repeated measurement of the magnetic recalibration for each of the species over a 1 month period showed less than 12% variation.

Research Organization:
Lawrence Livermore National Laboratory, Livermore, California 94550
DOE Contract Number:
W-7405-ENG-48
OSTI ID:
5725947
Journal Information:
J. Vac. Sci. Technol., A; (United States), Vol. 4:3
Country of Publication:
United States
Language:
English