Status of spray-dryer flue-gas desulfurization. Final report
Abstract
Utility interest and commitment to spray drying for SO/sub 2/ and particulate control has increased dramatically in response to vendor claims (lower costs, dry wastes, lower energy requirements, and simplicity) and newly promulgated federal emission regulations that allow lower SO/sub 2/ removal requirements (70%) for low-sulfur coals. Unfortunately, limited data are available from which to evaluate vendor claims prior to commercial commitment or to improve the cost and reliability of this potentially important flue gas desulfurization (FGD) option. Accordingly, EPRI is conducting a pilot-scale project (RP1870) to provide a systematic evaluation of the technology unconstrained by specific vendor designs, operating philosophy, or commercial limitation. It will result in guidelines for system design and optimization in order to ensure reliable utility operation at minimum cost. This final report (TPS 80-741) contains a review of the design practices for the full-scale systems ordered and a discussion of the important spray-drying FGD process variables. Other EPRI work in this area includes a cost study with the Tennessee Valley Authority (RP1180-7) and a spray-dryer waste solids characterization (RP1870-2). The EPA has published a similar status document, which, in addition to spray drying, also covers dry injection and burning coal-alkali mixtures. However, the EPA documentmore »
- Authors:
- Publication Date:
- Research Org.:
- Stearns-Roger Engineering Co., Denver, CO (USA)
- OSTI Identifier:
- 5687362
- Report Number(s):
- EPRI-CS-2209
ON: DE82902227
- Resource Type:
- Technical Report
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 20 FOSSIL-FUELED POWER PLANTS; DRY SCRUBBERS; COMMERCIALIZATION; COMPARATIVE EVALUATIONS; DESIGN; FLUE GAS; DESULFURIZATION; FOSSIL-FUEL POWER PLANTS; BAGHOUSES; CALCIUM HYDROXIDES; CYCLONE SEPARATORS; EPRI; FLY ASH; PILOT PLANTS; PLANNING; RECOMMENDATIONS; REMOVAL; SOLID WASTES; SPRAY DRYING; SPRAYS; SULFUR DIOXIDE; WASTE DISPOSAL; AEROSOL WASTES; ALKALINE EARTH METAL COMPOUNDS; ASHES; CALCIUM COMPOUNDS; CHALCOGENIDES; CHEMICAL REACTIONS; CONCENTRATORS; DRYING; EQUIPMENT; FUNCTIONAL MODELS; GASEOUS WASTES; HYDROGEN COMPOUNDS; HYDROXIDES; INERTIAL SEPARATORS; MANAGEMENT; OXIDES; OXYGEN COMPOUNDS; POLLUTION CONTROL EQUIPMENT; POWER PLANTS; RESIDUES; SCRUBBERS; SEPARATION EQUIPMENT; SULFUR COMPOUNDS; SULFUR OXIDES; THERMAL POWER PLANTS; WASTE MANAGEMENT; WASTES; 200202* - Fossil-Fueled Power Plants- Waste Management- Noxious Gas & Particulate Emissions
Citation Formats
Ireland, P A. Status of spray-dryer flue-gas desulfurization. Final report. United States: N. p., 1982.
Web.
Ireland, P A. Status of spray-dryer flue-gas desulfurization. Final report. United States.
Ireland, P A. 1982.
"Status of spray-dryer flue-gas desulfurization. Final report". United States.
@article{osti_5687362,
title = {Status of spray-dryer flue-gas desulfurization. Final report},
author = {Ireland, P A},
abstractNote = {Utility interest and commitment to spray drying for SO/sub 2/ and particulate control has increased dramatically in response to vendor claims (lower costs, dry wastes, lower energy requirements, and simplicity) and newly promulgated federal emission regulations that allow lower SO/sub 2/ removal requirements (70%) for low-sulfur coals. Unfortunately, limited data are available from which to evaluate vendor claims prior to commercial commitment or to improve the cost and reliability of this potentially important flue gas desulfurization (FGD) option. Accordingly, EPRI is conducting a pilot-scale project (RP1870) to provide a systematic evaluation of the technology unconstrained by specific vendor designs, operating philosophy, or commercial limitation. It will result in guidelines for system design and optimization in order to ensure reliable utility operation at minimum cost. This final report (TPS 80-741) contains a review of the design practices for the full-scale systems ordered and a discussion of the important spray-drying FGD process variables. Other EPRI work in this area includes a cost study with the Tennessee Valley Authority (RP1180-7) and a spray-dryer waste solids characterization (RP1870-2). The EPA has published a similar status document, which, in addition to spray drying, also covers dry injection and burning coal-alkali mixtures. However, the EPA document is not as detailed on either the design of full-scale systems or the technical issues.},
doi = {},
url = {https://www.osti.gov/biblio/5687362},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Fri Jan 01 00:00:00 EST 1982},
month = {Fri Jan 01 00:00:00 EST 1982}
}