Borehole-to-surface electromagnetic methods -- System design and field examples
- Sandia National Labs., Albuquerque, NM (United States)
- Lawrence Livermore National Lab., CA (United States)
- Univ. of California, Berkeley, CA (United States)
Borehole-to-surface electromagnetic (EM) methods are an attractive alternative to Surface-based EM methods for a variety of environmental and engineering applications. They have improved sensitivity to the subsurface resistivity distribution because of the closer proximity to the area of interest offered by the borehole for the source or the receiver. For the borehole-to-surface measurements the source is in the borehole and the receivers are on the surface. On the other hand, for the surface-to-borehole methods, the source is on the surface and the receiver is in a borehole. The surface-to-borehole method has an added advantage since measurements are often more accurate due to the lower noise environment for the receiver. For these methods, the source can be a grounded electric dipole or a vertical magnetic dipole source. An added benefit of these techniques is field measurements are made using a variety of arrays where the system is tailored to the application and where one can take advantage of some new imaging methods. In this short paper the authors describe the application of the borehole-to-surface method, discuss benefits and shortcomings, and give two field examples where they have been used for underground imaging. The examples were the monitoring of a salt water flooding of an oil well and the characterization of a fuel oil spill.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 52776
- Report Number(s):
- SAND-95-0853C; CONF-950450-7; ON: DE95011059; TRN: AHC29515%%47
- Resource Relation:
- Conference: 8. annual symposium on the application of geophysics to environmental and engineering problems, Orlando, FL (United States), 23-27 Apr 1995; Other Information: PBD: [1995]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Surface and borehole electromagnetic imaging of conducting contaminant plumes
Surface and borehole electromagnetic imaging of conducting contaminant plumes. 1997 annual progress report
Related Subjects
02 PETROLEUM
54 ENVIRONMENTAL SCIENCES
ELECTROMAGNETIC SURVEYS
PERFORMANCE
TECHNOLOGY ASSESSMENT
FLUID INJECTION
MONITORING
OIL SPILLS
SITE CHARACTERIZATION
OIL WELLS
WATERFLOODING
SENSITIVITY
DATA ANALYSIS
SOILS
FUEL OILS
ELECTRIC CONDUCTIVITY
WELL LOGGING EQUIPMENT
ORIENTATION
EXPERIMENTAL DATA