Solidification of hypereutectic Al-38 wt pct Cu alloy in microgravity and in unit gravity
- Univ. of Manitoba, Winnipeg, Manitoba (Canada). Dept. of Mechanical and Industrial Engineering
Solidification in microgravity aboard the space shuttle Endeavour resulted in a dramatic change in the morphology of the primary Al{sub 2}Cu phase compared to ground-based solidification in unit gravity. An Al-38 wt pct Cu ingot directionally solidified at a rate of 0.015 mm/s with a temperature gradient of 1.69 K/mm exhibited large, well-formed dendrites of primary Al{sub 2}Cu phase. Ingots solidified under similar conditions in unit gravity contained primary Al{sub 2}Cu phase with smooth, faceted surfaces. The primary Al{sub 2}Cu phase spacing in the microgravity ingot was much greater than that in the unit gravity ingot, 670 {micro}m compared to 171 {micro}m. It is suggested that thermosolutal mixing in the unit gravity ingot reduces the buildup of an Al-rich layer at the solid/liquid interface, which increases the stability of the interface resulting in smooth, faceted particles of Al{sub 2}Cu phase. It is also suggested that the large difference in primary phase spacings is due mostly to the difference in morphology rather than changes in parameters that might influence dendrite ripening mechanisms. The presence or absence of gravity had no effect on the interlamellar spacing of the inter-Al{sub 2}Cu phase eutectic. The ingot solidified in microgravity exhibited almost no longitudinal macrosegregation, in agreement with the theory of inverse segregation in the absence of thermosolutal convection. The ingot solidified in unit gravity exhibited considerable longitudinal macrosegregation, with the chilled end having about 6 wt pct more Cu than the average composition. It is not clear whether the segregation results from thermosolutal convection during solidification or from sedimentation during melting.
- Sponsoring Organization:
- Natural Sciences and Engineering Research Council of Canada, Ottawa, ON (Canada)
- OSTI ID:
- 509183
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Vol. 28, Issue 5; Other Information: PBD: May 1997
- Country of Publication:
- United States
- Language:
- English
Similar Records
Directional solidification of aqueous TiO2 suspensions under reduced gravity
Equiaxed dendritic solidification with convection. Part 2: Numerical simulations for an Al-4 wt pct Cu alloy