Vacuum testing of high efficiency AMTEC cells
- Laboratory/VTP, Kirtland AFB, NM (United States)
- Advanced Modular Power Systems, Ann Arbor, MI (United States)
- ORION International Technologies, Albuquerque, NM (United States)
- Creare, Inc., Hanover, NH (United States)
The Phillips Laboratory Power and Thermal Management Division (PL/VTP), in cooperation with JPL, AMPS, Creare, and ORION, is performing vacuum testing of high performance Alkali Metal Thermal to Electric Conversion (AMTEC) cells, including the Micro-Machined Evaporator (MME) and PL-9A cells. The MME cell was designed to test an improved evaporator, which should allow long term operation at evaporator temperatures as high as 1,100 K. The PL-9A cell was designed and built by AMPS under contract to ORION to test an improved heat shield assembly. The testing at Phillips Lab is done in a vacuum test stand which simulates the environment of an AMTEC cell operating as part of a spacecraft power system. The test configuration consists of the MME cell (later replaced by by the PL-9A cell) in the center of an array of six other AMTEC cells. The seven cells are encased in multifoil insulation. Testing shows that there is little difference between cell current/voltage performance when measured in vacuum tests compared to guard heater tests. The author are also examining the differences between fast I-V curve sweeps, recorded manually, with the cell operating at constant heat input, over a period of five minutes or less, and equilibrium I-V curve sweeps, in which the cell reaches thermal equilibrium at each data point.
- Sponsoring Organization:
- Department of the Air Force, Washington, DC (United States)
- OSTI ID:
- 442753
- Report Number(s):
- CONF-960805-; TRN: IM9712%%178
- Resource Relation:
- Conference: 31. intersociety energy conversion engineering conference, Washington, DC (United States), 9-14 Aug 1996; Other Information: PBD: 1996; Related Information: Is Part Of Proceedings of the 31. intersociety energy conversion engineering conference. Volume 2: Conversion technologies, electro-chemical technologies, stirling engines, thermal management; Chetty, P.R.K.; Jackson, W.D.; Dicks, E.B. [eds.]; PB: 867 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Recommended design and fabrication sequence of AMTEC test assembly
Vacuum testing of high efficiency multi-base tube AMTEC cells