Quench characteristics of 1-m-long SSC model dipole magnets
- KEK-National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan); and others
A series of fifteen 5-cm-aperture, 1-m-long SSC model dipole magnets with various types of end design and cable have been designed and fabricated at National Laboratory for High Energy Physics (KEK). The ramp-rate-dependent quench tests of the magnets KEKNo.3 to No.15 were performed in a 4.2-K vertical cryostat. A ramp-rate-dependent test of the magnet KEKNo.6 was also performed in 1.7-K pressurized superfluid helium. Special ramp tests so called {open_quotes}heating{close_quotes} and {open_quotes}cooling{close_quotes} experiments were also performed on the magnet KEKNo.10, as well as heat induced quench tests using the spot heaters installed in midplane of inner coils of the magnets KEKNo.7 and No.15 and in the splice part of the magnet KEKNo.13Y.
- OSTI ID:
- 416660
- Report Number(s):
- CONF-950722-; TRN: 97:001635
- Resource Relation:
- Conference: CEC/ICMC `95: cryogenic engineering conference and international cryogenic materials conference, Columbus, OH (United States), 17-21 Jul 1995; Other Information: PBD: 1996; Related Information: Is Part Of Advances in cryogenic engineering. Volume 41, Part A & B; Kittel, P. [ed.]; PB: 2037 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Quench characteristics of 5-cm aperture, 15-m long SSC dipole magnet prototypes
Quench performance of 50-mm aperture, 15-m-long SSC dipole magnets built at Fermilab