Third Intermetallic Matrix Composites Symposium, volume 350

Graves, J A; Bowman, R R; Lewandowski, J J

Title: Third Intermetallic Matrix Composites Symposium, volume 350

Full Record
Other Related Research

Abstract

Partial contents include: issues in potential IMC application for aerospace structures; powder metallurgy processing of intermetallic matrix composites; microstructure and properties of intermetallic matrix composites produced by reaction synthesis; combustion synthesis of niobium aluminide matrix composites; ambient temperature synthesis of bulk intermetallics; wear behavior of SHS intermetallic matrix composites; fracture characteristics of metal-intermetallic laminates produced by SHS reactions; and vapor phase synthesis of Ti aluminides and the interfacial bonding effect on the mechanical property of micro-composites reinforced by pyrolized SiC fibers.

Authors:: Graves, J A; Bowman, R R; Lewandowski, J J

Publication Date:: Fri Apr 01 00:00:00 EST 1994

Research Org.:: NASA Lewis Research Center, Cleveland, OH (United States)

OSTI Identifier:: 36640

Report Number(s):: N-95-20001; NASA-TM-110059; NAS-1.15:110059; LC-94-2659; CONF-9404182-
Journal ID: MRSPDH; ISSN 0272-9172; CNN: N00014-94-G-0212; TRN: 9520001

Resource Type:: Conference

Journal Name:: Materials Research Society Symposia Proceedings

Additional Journal Information:: Conference: 3. intermetallic matrix composites, San Francisco, CA (United States), 4-6 Apr 1994; Other Information: PBD: Apr 1994

Country of Publication:: United States

Language:: English

Subject:: 36 MATERIALS SCIENCE; MATRIX MATERIALS; FRACTURE MECHANICS; MICROSTRUCTURE; MOLYBDENUM COMPOUNDS; NICKEL ALLOYS; TITANIUM ALLOYS; MECHANICAL PROPERTIES; POWDER METALLURGY; SILICON CARBIDES

Citation Formats


                    Graves, J A, Bowman, R R, and Lewandowski, J J. Third Intermetallic Matrix Composites Symposium, volume 350.  United States: N. p., 1994. 
        Web.

Copy to clipboard


                    Graves, J A, Bowman, R R, & Lewandowski, J J. Third Intermetallic Matrix Composites Symposium, volume 350.  United States.

Copy to clipboard


                    Graves, J A, Bowman, R R, and Lewandowski, J J. 1994.  
        "Third Intermetallic Matrix Composites Symposium, volume 350".  United States.

Copy to clipboard


                    
@article{osti_36640,

  title        = {Third Intermetallic Matrix Composites Symposium, volume 350},

  author       = {Graves, J A and Bowman, R R and Lewandowski, J J},

  abstractNote = {Partial contents include: issues in potential IMC application for aerospace structures; powder metallurgy processing of intermetallic matrix composites; microstructure and properties of intermetallic matrix composites produced by reaction synthesis; combustion synthesis of niobium aluminide matrix composites; ambient temperature synthesis of bulk intermetallics; wear behavior of SHS intermetallic matrix composites; fracture characteristics of metal-intermetallic laminates produced by SHS reactions; and vapor phase synthesis of Ti aluminides and the interfacial bonding effect on the mechanical property of micro-composites reinforced by pyrolized SiC fibers.},

  doi          = {},

  url          = {https://www.osti.gov/biblio/36640},
  journal      = {Materials Research Society Symposia Proceedings},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Fri Apr 01 00:00:00 EST 1994},

  month        = {Fri Apr 01 00:00:00 EST 1994}

}

Copy to clipboard

Conference:

Other availability

Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Metal and ceramic matrix composites: Processing, modeling and mechanical behavior; Proceedings of the International Conference, Anaheim, CA, Feb. 19-22, 1990

Conference Bhagat, R; Clauer, A; Kumar, P; ...

The present conference on metal matrix composite (MMC) and ceramic matrix composite (CMC) processing, fracture and fatigue characteristics, and interfacial and high temperature performance, gives attention to such topics as tape-cast MMC laminates, the fabrication of high temperature fiber-reinforced intermetallic MMCs, diffusion-bonded preform Al-Si MMCs with SiC fiber reinforcement, HIPed SiC particulate-reinforced 6061 Al alloy MMCs, the performance and economics of CMCs, and the shock compression-processing of high performance ceramics. Also discussed are the high temperature properties of Mg9Li laminates, the deformation processing of Al-alumina MMCs, modeling the thermomechanical behavior of glass-matrix composites, interfacial reactions in SiC fiber-reinforced Ti alloymore »« less
Characterization and defect analysis of high temperature aluminum-based metal matrix composites

Miscellaneous Bayha, T

There is a need for an aluminum-based material to replace titanium in high temperature aerospace applications. Two powder metallurgy (P/M) matrices, RSP Al-8Fe-4Ce and MA Al-9Ti reinforced with 20 volume percent Al2O3 fibers or SiC whiskers or particles were developed for this purpose. Microstructural and mechanical property evaluations of these systems were performed to determine high temperature viability. Elevated temperature tensile tests demonstrated strengths of 14 ksi (98 MPa) at 450 C in the RSP matrix composites reinforced with SiC whiskers; the MA Al-9Ti materials produced tensile strengths of better than 17 ksi (120 MPa) at 500 C. Processing defectsmore »« less
Properties of in situ TiAl- and MoSi{sub 2}-base composites produced by reactive processing

Conference Alman, D; Hawk, J; Ziomek-Moroz, M

A variety of intermetallic matrix composites can be produced in situ by Self-Propagating, High-Temperature Synthesis (SHS). In this particular US Bureau of Mines study, stoichiometric mixtures of elemental Ti and Al, with additions of either B, Si or C (graphite), were reactively hot-pressed to form TiAl, reinforced with 10 to 60 volume percent boride reinforcement, Ti{sub 5}Si{sub 3} or TiC. Similarly, Mo and Si powders were reacted with either C (graphite) powders or fibers to form MoSi{sub 2}-SiC composites. Microstructural evaluation of the TiAl-based composites revealed that the reaction products were predominantly TiAl with a range of complex boride phasesmore »« less
Processing and characterization of niobium aluminide-based composites. Technical report

Technical Report Woytera, S; Bhagat, R

Many ordered intermetallic compounds exhibit attractive properties for high temperature structural aerospace applications. These materials provide an alternative to and surpass the performance of existing high temperature superalloys and ceramics. High melting point, low density, high strength, and relatively good corrosion resistance are the attractive properties that have led to the current thrust of research in these materials. However, the major obstacles limiting the use of these materials are their low ductility and toughness at room temperature and poor creep resistance at elevated temperatures. Previous studies have shown that micro and macro-alloying of several systems lead to improvements in lowmore »« less
Fracture toughness and R-curve behavior of laminated brittle-matrix composites

Journal Article Bloyer, D; Ritchie, R; Rao, K - Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

The fracture toughness and resistance-curve behavior of relatively coarse-scale, niobium/niobium aluminide (Nb/Nb{sub 3}Al) laminated composites have been examined and compared to other Nb/Nb{sub 3}Al composites with (in situ) Nb particulate or microlaminate reinforcements. The addition of high aspect-ratio Nb reinforcements, in the form of 20 vol. pct of 50- to 250-{micro}m-thick layers, was seen to improve the toughness of the Nb{sub 3}Al intermetallic matrix by well over an order of magnitude, with the toughness increasing with Nb layer thickness. The orientation of the laminate had a small effect on crack-growth resistance with optimal properties being found in the crack arrester,more »« less
https://doi.org/10.1007/s11661-998-0220-0

Similar Records