skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Reduction of friction loss through the use of rolling big-end bearings

Abstract

The authors compared motoring friction loss, output performance at WOT (wide open throttle) and specific fuel consumption of big-end bearings on engines having identical specifications between the case of using plain bearings and rolling bearings to investigate the effect of the lubricating oil supply rate on these parameters in an attempt to improve output through reduction of friction loss for big-end bearings of small, high-output motorcycle engines. Testing was performed using a 125 cc, 4-cycle, single cylinder engine at high engine speeds mainly above 10,000 rpm. As a result, it was found that rolling bearings have a lesser effect en lubricating oil supply and crank pin temperature than plain bearings, that friction loss, output performance and specific fuel consumption of plain bearings and rolling bearings are roughly equal in the case of equal lubricating oil supply rate, and that since it is possible to reduce lubricating oil supply rate without an accompanying increase in crank pin temperature in the case of rolling bearings, the benefits of improved output performance and specific fuel consumption resulting from reducing lubricating oil supply rate can be realized to a greater extent than in the case of plain bearings, and the extent of that improvementmore » is roughly 3% for both output performance and specific fuel consumption.« less

Authors:
;
Publication Date:
OSTI Identifier:
253611
Report Number(s):
CONF-950942-
ISBN 1-56091-673-7; TRN: IM9630%%62
Resource Type:
Conference
Resource Relation:
Conference: Small engine technology conference and exposition, Milwaukee, WI (United States), 13-15 Sep 1995; Other Information: PBD: 1995; Related Information: Is Part Of Proceedings of the 1995 small engine technology conference: Small engines and the environment. P-292; PB: 497 p.
Country of Publication:
United States
Language:
English
Subject:
33 ADVANCED PROPULSION SYSTEMS; SPARK IGNITION ENGINES; ENERGY LOSSES; FRICTION; BEARINGS; FUEL CONSUMPTION; ENERGY CONSERVATION

Citation Formats

Tsuchida, Naoki, and Tsuzuku, Hiroyuki. Reduction of friction loss through the use of rolling big-end bearings. United States: N. p., 1995. Web.
Tsuchida, Naoki, & Tsuzuku, Hiroyuki. Reduction of friction loss through the use of rolling big-end bearings. United States.
Tsuchida, Naoki, and Tsuzuku, Hiroyuki. 1995. "Reduction of friction loss through the use of rolling big-end bearings". United States.
@article{osti_253611,
title = {Reduction of friction loss through the use of rolling big-end bearings},
author = {Tsuchida, Naoki and Tsuzuku, Hiroyuki},
abstractNote = {The authors compared motoring friction loss, output performance at WOT (wide open throttle) and specific fuel consumption of big-end bearings on engines having identical specifications between the case of using plain bearings and rolling bearings to investigate the effect of the lubricating oil supply rate on these parameters in an attempt to improve output through reduction of friction loss for big-end bearings of small, high-output motorcycle engines. Testing was performed using a 125 cc, 4-cycle, single cylinder engine at high engine speeds mainly above 10,000 rpm. As a result, it was found that rolling bearings have a lesser effect en lubricating oil supply and crank pin temperature than plain bearings, that friction loss, output performance and specific fuel consumption of plain bearings and rolling bearings are roughly equal in the case of equal lubricating oil supply rate, and that since it is possible to reduce lubricating oil supply rate without an accompanying increase in crank pin temperature in the case of rolling bearings, the benefits of improved output performance and specific fuel consumption resulting from reducing lubricating oil supply rate can be realized to a greater extent than in the case of plain bearings, and the extent of that improvement is roughly 3% for both output performance and specific fuel consumption.},
doi = {},
url = {https://www.osti.gov/biblio/253611}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Sun Dec 31 00:00:00 EST 1995},
month = {Sun Dec 31 00:00:00 EST 1995}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: