skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Detection of emission sources using passive-remote Fourier transform infrared spectroscopy

Conference ·
OSTI ID:231017
; ;  [1];  [2]
  1. Argonne National Lab., IL (United States)
  2. Army Edgewood Research, Development, and Engineering Center, Aberdeen Proving Ground, MD (United States)

The detection and identification of toxic chemicals released in the environment is important for public safety. Passive-remote Fourier transform infrared (FTIR) spectrometers can be used to detect these releases. Their primary advantages are their small size and ease of setup and use. Open-path FTIR spectrometers are used to detect concentrations of pollutants from a fixed frame of reference. These instruments detect plumes, but they are too large and difficult to aim to be used to track a plume to its source. Passive remote FTIR spectrometers contain an interferometer, optics, and a detector. They can be used on tripods and in some cases can be hand-held. A telescope can be added to most units. The authors will discuss the capability of passive-remote FTIR spectrometers to detect the origin of plumes. Low concentration plumes were released using a custom-constructed vaporizer. These plumes were detected with different spectrometers from different distances. Passive-remote spectrometers were able to detect small 10 cm on a side chemical releases at concentration-pathlengths at the low parts per million-meter (ppm-m) level.

OSTI ID:
231017
Report Number(s):
CONF-950209-; TRN: IM9623%%327
Resource Relation:
Conference: 4. international symposium on field screening methods for hazardous wastes and toxic chemicals, Las Vegas, NV (United States), 22-24 Feb 1995; Other Information: PBD: 1995; Related Information: Is Part Of Field screening methods for hazardous wastes and toxic chemicals. VIP-47, Volume 1; PB: 733 p.
Country of Publication:
United States
Language:
English